Edit From A Camcorder - JVC HM-HDS1U Instructions Manual

76
EN
Edit From A
Camcorder
Recorder
yyy
POWER
yyy
yyy
HM-HDS1
Player
Camcorder
S-VIDEO
OUT
VIDEO IN
PAUSE connector
Your recorder
DIGITPURE TECHNOLOGY
S-VIDEO IN
S-VIDEO
AUDIO
cable
IN
(supplied)
Audio/Video
cable
(supplied)
AUDIO OUT
VIDEO OUT
EDIT
Mini-plug cable
(not supplied)
(JVC camcorder only)
You can use a camcorder as the player and your recorder as the
recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the camcorder's VIDEO
OUT and AUDIO OUT connectors and your recorder's
VIDEO IN and AUDIO IN connectors.
If connecting a camcorder with an S-VIDEO output
connector, it is recommended to use the S-VIDEO
connection to minimize picture degradation while
editing.
VHS deck ONLY
When a Master Edit Control-equipped JVC camcorder is
used, the camcorder is capable of controlling your
recorder. The mini-plug cable is a mono 3.5 mm
mini-plug to mono 3.5 mm mini-plug connector.
If connecting to a camcorder with a monaural output,
yy
yy yy
connect the audio output connector on the
camcorder to AUDIO IN L of the recorder.
TURN ON THE RECORDER
2
Press POWER.
SELECT RECORDING DECK
3
Press HDD or VHS (or S-VHS).
• When you select VHS deck, load a recordable
cassette.
SELECT INPUT MODE
4
Press CH +/– to select depending on the connector
being used – "F-1" for the front panel input connectors,
or "L-1" for the rear panel input connectors.
ACCESS VIDEO INPUTS SCREEN
5
1) Press MENU.
2) Select "FUNCTION SET UP", then press %fi (or 5∞)
or OK.
3) Select "VIDEO INPUTS", then press %fi (or 5∞) or
OK.
SELECT VIDEO INPUT MODE
6
Set "S-VIDEO" or "COMPOSITE" to "FRONT AUX F-1"
or "REAR AUX L-1" by pressing %fi (or 5∞) or OK.
For details on setting, see page 22.
EDITING (cont.)