Normal Dubbing (From Hdd To Vhs) - JVC HM-HDS1U Instructions Manual

72
EN
Normal
Dubbing
(from HDD to VHS)
yyy
POWER
yyy
HM-HDS1
REC LINK
HDD
MENU NAVI
OK
CH
HDD
1
2
<
REC SPEED
1
2
REW
REC
DIGITPURE TECHNOLOGY
STOP PLAY PAUSE REC
S-VHS ET
S-VHS
REW FEW
A. DUB
1 2 3
4 5 6
3
7 8 9
4
0
>
CH+/–
FF
PAUSE
– +
You can dub selected scenes on a tape, starting and stopping
wherever you wish.
TURN ON THE RECORDER
1
Press POWER.
PREPARE HDD DECK FOR
DUBBING
2
1) Press HDD and select the program to be dubbed.
You can select the program by HDD Navigation.
2) Press CH +/– to set the channel other than "DUB".
LOCATE START POINT
3
EJECT 1) Select the point where you want to start dubbing by
pressing PLAY, FF, REW.
yy
yy yy
VIDEO (M) L – AUDIO – R
2) Press REW a little, then press PLAY to start playback.
S-VIDEO
FF
PAUSE
F - 1
3) Press PAUSE to pause playback before that point a
little.
PREPARE VHS DECK FOR
DUBBING
4
1) Press VHS (or S-VHS) and load a recordable cassette.
2) Press CH +/– to set the channel "DUB".
3) Press REC SPEED to select recording speed.
4) Select the point where you want to start recording by
pressing PLAY, FF, REW, STOP.
START DUBBING
5
1) Press HDD and PLAY to start playback.
2) Press VHS and REC (REC and PLAY on the remote
control) to start dubbing.
END DUBBING
6
Press STOP. Then press HDD and press STOP.
NOTES:
G There may be a discrepancy of several seconds between
where you intend editing to start, and where it actually starts.
The superimposed indication during the operation or dubbing
G
is not recorded.
EDITING (cont.)