NEC Univerge SV8100 Features And Specifications Manual page 958

Issue 8.01
SV8100 Feature Name
Speed Dial – System/Group/Station
Station Hunt
Station Message Detail Recording
Station Name Assignment – User
Programmable
Station Relocation
SV8100 Desktop Applications
SV8100 Internal Router
SV8100 NetLink
SV8100 PoE Gigabit Switch
SV8100/SV8300 Terminals
Synchronous Ringing
T1 Trunking (with ANI/DNIS
Compatibility)
Tandem Ringing
Tandem Trunking (Unsupervised
Conference)
TAPI Compatibility
Tone Override
Traffic Reports
Transfer
Trunk Group Routing
2 - 930
Table 2-44 Supported Features (Continued)
Supported
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Not
Supported
The access code can not be dialed
from the MH240 to change the station
name. However, you can dial the
access code from another station and
change the MH240 name.
The code can not be dialed from the
MH240 in first release. In the future,
this will be added. However, you can
dial this code from another phone and
swap the extensions.
N/A
N/A
X
X Not supported first release.
On first release the access code 733
is not supported.
X
On a transferred call ring tone may
skip once. Internal ring tone and
transfer ring tone are the same on the
MH240. So when it changes from the
Internal to Transfer there can be what
sounds like a skip in the ring cycle.
MH240 Wireless IP Telephone
UNIVERGE SV8100
Remarks