Yamaha AVENTAGE RX-A1040 Owner's Manual page 98

■
Dialogue (Dialog)
Adjusts the volume or perceive height of dialogue sounds.
Dialogue Level (Dialog Lvl)
Adjusts the volume of dialogue sounds. If dialogue sounds cannot be heard
clearly, you can turn up its volume by increasing this setting.
Setting range
0 to 3
Dialogue Lift (Dialog Lift)
Adjusts the perceived height of dialogue sounds. If the dialogue sounds as if it is
coming from below the TV screen, you can raise its perceived height by increasing
this setting.
• This setting is available only when one of the following conditions is met.
– One of the sound programs (except for 2ch Stereo and 7ch Stereo) is selected when front
presence speakers are used.
– Virtual Presence Speaker (VPS) (p.58) is working.
(You may hear dialogue sounds from the surround speakers depending on the listening position.)
Setting range
0 to 5 (The bigger the value the higher the position)
■
Adjust the subwoofer volume or bass sound.
■
Enables/disables Compressed Music Enhancer (p.62).
• This setting is applied separately to each input source.
• You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer
Ideal position
• Compressed Music Enhancer does not work on signals whose sampling rate is over 48 kHz.
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)
Subwoofer/Bass (Subwoofer/Bass)
Subwoofer Trim (SW.Trim)
Fine-adjusts the subwoofer volume.
Setting range
-6.0 dB to 0.0 dB to +6.0 dB (0.5 dB increments)
Extra Bass (Extra Bass)
Enables/disables Extra Bass. When Extra Bass is enabled, you can enjoy
enhanced bass sounds, regardless of the size of the front speakers and the
presence or absence of the subwoofer.
Settings
Off (Off) Disables Extra Bass.
On (On) Enables Extra Bass.
Enhancer (Enhancer)
(p.62).
Settings
Off (Off) Disables Compressed Music Enhancer.
On (On) Enables Compressed Music Enhancer.
Default
TUNER, USB, (network sources): On (On)
Others: Off (Off)
98
En