Figure 3.16 [Connection Check Information] Window; Figure 3.17 [Information Transmit Agreement] (For Automatic Setting) Window - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 3 REMCS Service Start Procedure
3.3 Importing the Registration Information
- Notification of the result to the administrator
Specify whether to report the result to the administrator. The administrator e-mail address in the
imported customer information is displayed as your administrator e-mail address.
- Notification of the result to the installer
Specify whether to report the result to the installer. If you select notification, set the installer's e-mail
address in [E-mail address for receiving results].
4. Click the [Next] button to set automatic registration.
The window shown in
appears.

FIGURE 3.17 [Information Transmit Agreement] (for automatic setting) window

5. Confirm the agreement and click the [Agree] button.
After the customer information is registered, the window shown in
state] window

FIGURE 3.16 [Connection check information] window

FIGURE 3.17 [Information Transmit Agreement] (for automatic setting) window
appears.
FIGURE 3.18 [Automatic registration
21
CA92344-0542-02