Setting The Customer Information; Figure 3.7 [Periodical Connection Settings] Window; Figure 3.8 [Customer Information] Window; Table 3.3 Input Items For The [Periodical Connection Settings] Window - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 3 REMCS Service Start Procedure
3.2 REMCS Center Registration
1. Specify the values for the following items.
Item
current schedule of
Periodic Connection
Period
A day of the week
2. Click the [Next] button.
After the periodic connection schedule is registered, the customer information window appears. Proceed
to 3.2.5 Setting the customer

3.2.5 Setting the customer information

Enter the customer information in the window shown in
After starting the REMCS service, you can still change the customer information by clicking [Customer
Information update] from the menu in the window shown in

FIGURE 3.7 [Periodical Connection settings] window

TABLE 3.3 Input items for the [Periodical Connection settings] window

The initial values are [Every week] and [10:00] to [15:00]. Specify
values if you need to change the setting.
Specify the setting from [Every day], [Every day (excluding Sunday)],
[Every day (excluding Saturday & Sunday)], and [Every week].
If you specified [Every week] for the period, you need to specify a day
of the week (Sunday to Saturday).
information.
Description
FIGURE 3.8 [Customer Information]
FIGURE 4.1 [REMCS initial]
14
window.
window.
CA92344-0542-02