Programming For Constant Run; External Control; Features: Quick Clean - Pentair INTELLIFLO VS+SVRS Installation And User Manual

17

Programming for Constant Run

When programming a schedule for a Speed it can not be programmed with the same start and
stop times. However, it will run without stopping if it is programmed with the Start time set one
minute after the stop time. Example: A single speed will run non stop if programmed with a Start
Time of 8:00 AM and a Stop time of 7:59 AM.

External Control

This function is for programming speeds that will run when the IntelliComm
sends it a command. For example, Terminal 3 and 4 in IntelliComm communication center will
correspond to External Control Program #1. (5 and 6 to Ext Ctrl #2). Use the External Control feature to
program the IntelliComm power center.
To access the Ext. Ctrl. menu:
1. Check that the green power LED is on.
2. Press the Menu button. "Settings" is displayed.
3. Use the Up or Down arrow button to scroll to "Ext. Ctrl.".
5. Press the Select button. "Program 1" is displayed.
6. Press the Select button. "1100 RPM' is displayed.
7. Press the Select button. The "RPM" number will highlight.
8. Press Up or Down arrow button to change the RPM setting.
9. Press the Enter button to save the setting.
Note: To cancel any changes, press the Escape button to exit without saving.
10. Press the Escape button.
11. Use the Up or Down arrow button to scroll to "Program 2".
12. Repeat Step 5 through 9 to set Program 2, 3, and 4.12 Programmable Speeds.

Features: Quick Clean

NOTE: Quick Clean is the only high-speed override feature of the IntelliFlo
IntelliPro VS+SVRS Variable Speed Pumps.
®
This feature can be used to ramp the pump up to a higher RPM for vacuuming, cleaning, adding
chemicals, after a storm for extra skimming capability. Press the Quick Clean button (LED on) and
then the Start/Stop button (LED on) to start the pump at preset RPM and duration of time. When
the Quick Clean cycle is over it will resume regular schedules, it will be in the "Running Schedule"
mode.
INTELLIFLO VS+SVRS and INTELLIPRO
®
VS+SVRS Variable Speed Pump Installation and User's Guide
®
Communication Center
®
VS+SVRS or
®