Parameter Group 13: Simple Plc - Holip HLP-A100 Series Operating Manual

HLP-A100 Series
[3] Logic or, Activate via serial communication port or a digital input;
Function: Select control of Set-up Select f unction via digital input or bus.
C08.56 Function Description
Preset Reference Select
Option: [0] Digital input, Aciviate via a digital input;
[1] Bus, Activate via serial communication port;
[2] Logic and, Activate via serial communication port and a digital
input;
[3] Logic or, Activate via serial communication port or a digital input;
Function: Select control of Preset Reference Select f unction via digital input
or bus.
C08.9* Bus Jog/Feedback
C08.94 Function Description
Bus Feedback 1
Function: Enter the value to be used as bus-feedback. Hex-value 4000H
corresponds to 100% feedback/range is +/-200%.

6.10 Parameter Group 13: Simple PLC

Simple PLC is a user-def ined sequence of operation (C13.52[x]). When
the associated user-defined envents (C13.51 [x]) is set to true, Sample PLC will
perform these operations.
Events and related operations are paired, that is , once an event is "true",
will execute its associated action. You can set up to 30 events and operations.
Start and stop simple PLC: Selected by C13.00 order or parallel control,
when start event (par. 1 3.01) is "true", start simple PLC, when stop event (C13.02)
is "true", Simple PLC will be stopped. In addition, you can also choose off [0]
(C13.00) to stop the simple PLC.
Attention: Simple PLC f unction is only valid in auto mode.
C13.0* Simple PLC Settings
Use the Sample PLC settings to active disable or reset simple PLC.
C13.00 Function Description
Sample PLC Mode
Option: [0] *Disabled;
- -
110
-32768~32767
HLP-A100 Series Operating Manual
Range Unit
0~3
Range Unit
Range Unit
0~2
Default Setting
3
Default Setting
0
Default Setting
0