Table of Contents
Advertisement
CAUTION: Be careful not to damage
the radiator fins when cleaning. Do
not use any object/tool that could
damage the fins. The fins are pur-
posely thin parts to allow efficient
cooling. WHEN HOSING, USE LOW
PRESSURE ONLY. NEVER USE A
HIGH PRESSURE WASHER.
Properly reinstall access plug and seat.
Carburetor
Quest MAX and Traxter MAX Series
See an authorized Bombardier ATV
dealer each year to verify and clean the
fuel system.
Air Intake System
Quest MAX and Traxter MAX Series
Air Filter Cleaning/Draining
Periodically inspect air filter box drain
tube for liquid or deposits.
3
V04C16Y
TYPICAL
1. Air filter box
2. Drain tube
3. Clamp
NOTE: If vehicle is used in dusty area,
inspect more frequently than specified
in MAINTENANCE CHART.
If liquid/deposits are found, squeeze and
remove the clamp. Pull drain tube out
and empty it.
CAUTION: Do not start engine when
liquid/deposits are found in the drain
tube.
1
2
When liquid/deposits are found, the air
filter must be inspected/dried/replaced
depending on its condition.
Remove air filter as explained below.
Air Filter Removal
CAUTION: Never remove or modify
any component in the air box. Other-
wise, engine performance degrada-
tion or damage can occur. The engine
carburation is calibrated to operate
specifically with these components.
Remove seat.
Release clamps and remove air filter
box cover.
V01F05Y
TYPICAL
1. Release clamps
2. Lift to remove
Loosen clamp and remove air filter.
V01F1LY
1. Clamp
2. Air filter
1
2
1
2
131
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Quest Max 2004 and is the answer not in the manual?
Questions and answers
My ATV is not shifting. It is stuck in park. The shift stick seems to be loose
A 2004 Bombardier Quest Max ATV could be stuck in park with a loose shift stick due to the following possible causes:
1. Transmission Lock Mechanism Issue – The transmission may have a lock mechanism preventing the shift lever from working.
2. High Engine Idle Speed – If the engine idle speed is set too high, it may prevent proper shifting. Adjust the idle speed according to specifications.
3. Dirty or Worn CVT (Continuously Variable Transmission) – A dirty or worn CVT can cause shifting problems. Contact an authorized Bombardier ATV dealer for inspection and maintenance.
If the issue persists, professional servicing may be required.
This answer is automatically generated