Setting Audio - JVC 2A73501A User Manual

Setting Audio

NOTES:
• The Dynamic Range Control function
works only during playback of Dolby
Digital recorded discs.
• The level of Dynamic Range Control
may differ depending on the DVD video
disc.
• The vocal output feature is used during
playback of Dolby Digital (multi-channel)
recorded DVD KARAOKE discs. This
feature allows you to turn off vocal audio
tracks, or restore them for background
accompaniment.
• When playing KARAOKE, connect the
appropriate audio equipment such as an
amplifier to the DVD player.
56
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then
press DVD to select the DVD mode. (The DVD indicator will light)
Audio Out Select
Select the output sound format corresponding to your system connection.
For details of sound recording systems, see on page 59.
1
Press SET UP MENU in the stop mode.
Press or to select "Audio".
2
Press or to select "Audio Out
Select", then press OK (Enter). Press
or to select your desired output
sound.
Bitstream: Select when connected to an amplifier equipped with a Dolby
Digital, DTS, MPEG1 or MPEG2 decoder. The DVD/VCR outputs
digital audio information in the bitstream format when you play a
DVD video disc recorded on the Dolby Digital, DTS, MPEG1 or
MPEG2 recording system.
Analog 2ch: Select when connected to a TV, Dolby Pro Logic or stereo system
via the analog audio jacks.
PCM: Select when connected to a 2 channel digital stereo amplifier.
The DVD/VCR outputs sounds in the PCM 2ch format when you
play a DVD video disc recorded on the Dolby Digital. MPEG1 or
MPEG2 recording system.
3
To make the SETUP screen disappear, press SET UP MENU.
Dynamic Range Control
Turn on or off a function that makes faint sounds easier to hear
even if you lower the volume during late hours playback.
1
Press SET UP MENU in the stop
mode.
Press or to select "Audio".
2
Press or to select "Dynamic
Range Control", then press OK (Enter).
Press or to select "On" or "Off".
Off: Full dynamic range is maintained.
On: Dynamic range is reduced.
3
To make the SETUP screen disappear,
press SET UP MENU.
Karaoke Vocal
Turn on or off the vocal output during DVD KARAOKE disc
playback.
1
Press SET UP MENU in the stop mode.
Press or to select "Audio".
2
Press or to select "Karaoke
Vocal", then press
Press or to select "On" or "Off".
Off: The primary vocal is not output.
On: The primary vocal is output when
it is recorded on the disc.
3
To make the SETUP screen disappear, press SET UP MENU.
Audio Out Select
Dynamic Range Control On
Karaoke Vocal
Audio Out Select
Dynamic Range Control On
Karaoke Vocal
Audio Out Select
Dynamic Range Control On
Karaoke Vocal
OK (Enter) .
Audio
Bitstream Bitstream
Analog 2ch
On PCM
: Select : Enter
Audio
Bitstream Off
On
Off
: Select : Enter
Audio
Bitstream Off
On
Off
: Select : Enter