Table of Contents
Advertisement
Symptom
Picture noise appears.
The unit does not play back the tape.
Recording does not start immediately after
pressing [VCR REC I].
The remote control does not function.
The motor rotates even when playback /
recording is stopped.
*If the above remedies do not solve the problem, please call the service centre for help.
VCR
• Adjust tracking control for better picture by pressing [PR +/-] while you are
playing back a video tape.
• Head cleaning for VCR may be necessary. Refer to "AUTO HEAD CLEANING."
• No video tape is inserted.
• Make sure the video tape has a record tab when you record to a video tape. If
needed, cover the hole with cellophane tape.
• Check if a video tape is in the unit. Press [VCR]. Then, try again.
• The motor may rotate for the duration of approximately 5 minutes for efficient
operation. This is not a malfunction.
Remedy
69
EN
Advertisement
Table of Contents
