Vcr Functions; Playback; Recording And One-Touch Timer Recording (Otr) - JVC 0905TNH-FN-FN Instructions Manual

VCR Functions

Playback

VCR VCR
1
Press [
STANDBY/ON
the unit.
To play back a tape, turn on the TV and be sure to
select the input to which the unit is connected.
2
Press [VCR].
3
Insert a prerecorded tape, then press
[PLAY P] to begin playback.
4
During playback, press [PAUSE p].
Playback will be paused and sound will be muted.
5
Press [PLAY P] to resume playback.
6
Press [STOP S] to stop playback.
7
Press [VCR STOP/EJECT S/O] on
the unit to eject the tape.
Note
• When a tape without record tab is inserted, the unit
will start playback automatically.
• Tracking will be automatically adjusted upon
playback. To adjust the tracking manually, press
[PR ].
+/-
64
EN
Recording and One-Touch Timer
Recording (OTR)
] to turn on
/I
Basic Recording
Before recording, make sure:
• The desired channel is selected by pressing the
• There is a tape with a record tab in the unit.
• The desired recording speed is selected in SP
Tape speed
Type of tape
SP mode
LP mode
• Refer to page 29 for instructions on timer recording.
1
2
3
4
5
6
VCR VCR
number buttons on the remote control.
(standard play) or LP (long play) mode by pressing
[REC SPEED] on the remote control.
Recording / Playback Time
E60
1 hour
2 hours
Turn on the unit and insert a
recordable tape.
Make sure that the TV input is set on the unit.
Press [VCR].
Select the recording speed using
[REC SPEED].
• The desired recording speed is selected in SP
(standard play) or LP (long play) mode by
pressing [REC SPEED].
Select the desired channel to record
using [PR +/-] or [the Number
buttons].
Press [VCR REC I] to start
recording.
To temporarily stop recording or to resume it,
press [PAUSE p]. After the unit has been in
pause mode for 5 minutes, it will stop
automatically to protect the tape and the video
head from damage.
Press [STOP S] when the recording
is completed.
E120 E180
2 hours 3 hours
4 hours 6 hours