38
EN
VCR
CABLE
TV
/DBS
D
C
Watching one program while
recording another
1
Engage TV mode
During recording...
• Change the TV's input mode from AV to TV.
2
Select channel for viewing
Select the channel you want to watch, on the TV.
D
Showing on-screen display
When "SUPERIMPOSE" is set to "ON" (A page 66), you
can see the current VCR status on the TV screen.
•
For more detailed information about the on-screen
display, see page 10.
1
Display VCR status on TV screen
During recording or
recording pause, press
[OSD] on the Remote.
All indications
corresponding to the
current VCR status are
displayed for 5
seconds.
The time counter remains on the screen indicating
the elapsed time.
• The indications are not recorded.
2
Exit on-screen display
Press [OSD] again.
NOTES:
•
The subtitles does not appear while the on-screen display is
displayed.
•
If the VCR is in recording pause mode, "Y" is always
displayed.
•
The VCR status can be also displayed during playback.
•
Even if "SUPERIMPOSE" is set to "OFF" (
screen display appears when the VCR plays back the blank
portion of a tape and the VCR receives the channel which has
no broadcast. However, on-screen display does not appear
when the input location is selected and no signal is input.
RECORDING (cont.)
D-VHS
INDEX -9
HD
CH 123
D-VHS STD
12:00 AM
B
E
L R
SAP STEREO
A
page 66), the on-