Dustbag Compartment Lid (And Hinges, If Applicable); S 3Xx; S 4Xx; Figure 5-1: Dustbag Compartment Lid, S 4Xx - Miele S 247i Technical Manual

Technical Information
service work.
5.1

Dustbag Compartment Lid (and Hinges, if Applicable)

5.1.1 S 25x
1. Open the dustbag compartment lid as far as possible, and then pull
upwards to remove.
2. Release locking tabs, using a small flathead screwdriver if necessary.
5.1.2 S 27x
1. Remove the 2 Phillips screws securing the sides of the dustbag
compartment lid.
2. Open the dustbag compartment lid as far as possible, and then pull
upwards to remove. The hinges may also come off.
5.1.3

S 3xx

1. Open the dustbag compartment lid fully.
2. Push the dustbag compartment lid to the rear to release its clip retainers.
3. Pull the dustbag compartment lid upwards to remove it.
5.1.4

S 4xx

1. Open the dustbag compartment lid until it is vertical. The hinges (Figure 5-
1, Item 4) engage and hold it in this position.
2. Use a screwdriver to unclip the hinges from their holders (Figure 5-1, Item
3) on the left and right.
3. To re-install, push the dustbag compartment lid, with its hinges installed,
into the holders.

Figure 5-1: Dustbag Compartment Lid, S 4xx

S 2xx, S 3xx & S 4xx Canister Vacuums
28