Lockout Time Setting - Panasonic DP-C406 Function Manual

Lockout Time Setting

This sets the time period (minutes) for the system lockout when the permitted number of log-on
attempts is exceeded during the User Authentication. Wait for the Lockout Time period to lapse before
you are permitted to log on to User Authentication.
Before performing this setup, you first need to set "45 User Authentication" (See page 12).
1
Press the Function key.
2
Select "General Settings".
3
Select "5-9" tab, and then select "09
Key Operator Mode".
1 2
4
Enter the Key Operator password (8
digits), and then select "OK".
1
The default password is "00000000".
To change the password, select "80 Key
Operator Password" in the General
Settings (Key Operator Mode), and then
enter the new password.
5
Select "40 - 59" tab, and scroll the
screen, and then select "48 Lockout
Time".
1 3
2
2
23