Panasonic DP-C406 Function Manual page 13

6
Select the function where
authentication is required, and then
select "OK".
Copy Select "Copy".
Fax Select "Fax".
Print Select "Print".
Scan Select "Scan".
The Sender Selection function is not
available if the User Authentication is set for
the Fax function.
For details, refer to Fax Parameters in the
Operating Instructions (For Function
Parameters) of provided CD-ROM.
7
Select "On" to use authentication or
"Off" to disable authentication, and
then select "OK".
Off Disables authentication.
On Enables authentication.
When User Authentication is enabled for the
first time, you also need to specify the time
zone, system administrator's name, and
system administrator's password.
1 2
1 2
8
Select or
time zone, and then select "OK".
9
Enter the system administrator name,
and then select "OK".
Ex: panasonic
1
10
Enter the system administrator
password, and then select "OK".
Ex: pana
1
The administrator name and password set
here are required in the subsequent setup
operations (See page 31). Keep them in a
safe place.
to specify the
1 2
2
2
13