Pdl Error; E-Mail Errors - Xerox Phaser 6000 Service Manual

Error Messages and Codes

PDL Error

E-mail Errors

Applicable Error
Initial Actions
3-40
The 016-720 error is caused because there is something in the image that cannot
be resolved by the driver.
An e-mail error is detected.
• 016-764: Connect Error
• 016-766: SMTP Error
• 016-767: E-mail Address Error
• Cycle printer power.
• If the problem persists, use the following procedure.
Troubleshooting Reference Table
Applicable Parts
IP Board, PL7.1.9
MCU Board, PL7.2.2
Troubleshooting Procedure Table
Step Actions and Questions
1 Reseat all connectors on the IP
Board and the MCU Board.
Does the error persist?
2 Replace the IP Board (page 8-114).
Does the error persist when the
power is turned on?
Xerox Internal Use Only
Wiring and Plug/Jack Map References
"Map 2 - WorkCentre 6015 MFP" on
page 10-22
"Map 3 - WorkCentre 6015 MFP" on
page 10-23
"WorkCentre 6015 MFP Image
Processor Board" on page 10-32
Yes No
Go to step 2. Complete.
Replace the Complete.
MCU Board
(page 8-121).
Phaser 6000/6010 and WC 6015 MFP