Dismantling The Camera - JVC WB-S681U Instructions Manual

Dismantling the camera

1.
Remove the ceiling panel.
2.
Remove the camera
from WB-S685U.
Press the release lever and
remove.
CAUTION
Always support the camera with the
palm of your hand when performing
this operation.
3.
Remove the fall
prevention wire.
Dismantling WB-S685U
1.
Remove the ceiling
attachment fitting and
the cable.
Remove in the reverse
procedure of mounting.
2.
Rotate the fixing
screws (x3) in
anticlockwise direction.
3.
Remove the stopper.
Push up the stopper release
lever with a screw driver.
CAUTION
Be sure to support WB-S685U when
performing this operation.
4.
Remove WB-S685U from the ceiling.
Release
lever
Press
Release
lever
Press
3.
Stopper
Stopper
release lever
Push
upwards
Screw
driver
2.
Rotate in
anticlockwise
direction.
Screw driver
4.
Release
lever
2.
Press
2.
Fixing screw (x3)