JVC VN-C20 Instructions Manual page 25

6.
The top page of VN-C20 appears
7.
The [Basic] page with the IP address settings appears
A confirmation screen appears. Press the [OK] button. The system restarts using the new IP address of
VN-C20.It takes about 1 minute for the camera to reboot.
Note:
● Access from this computer may fail when the IP address of VN-C20 is changed. To enable access to
VN-C20 from the same computer, alter the IP address at the computer accordingly.
Click on [Network], followed by [Basic]
on the next submenu.
Set the [IP Seting] item to [DHCP
A
Disable].
B
Enter the values you wish to specify in
[IP Address], [Subnet Mask] and
[Default Gateway].
C
Click [OK].
25