Maintenance; Engine - Agria 5300 Operating Instructions Manual

5. Maintenance

Apart from adhering to operating instructions for grassland mowers, it is also im-
portant to observe the following maintenance instructions.
Always wear safety gloves, when working near mowing knives.
A; 5 h
5 5
32
Warning: Only do maintenance work with the engine
shut off. Always remove spark plug connector from spark
plug, to avoid accidentally starting the engine while working
on the grassland mower or on the engine.
B/11
Changing Engine Oil
The first oil change is after 5 operating hours. Subsequent oil
changes are after 50 operating hours or once a year, depending
on which period is completed first. At extreme strain and high
temperatures, change oil after 25 operating hours.
Open the drain plug (1) and the filling plug (2) and drain the oil
into a suitable container or use a suction pump to remove the oil
through the filler neck.
Ensure the waste oil is disposed of properly!
Before you retighten the drain plug (1) inspect the condition of
the sealing ring (3). Replace it if necessary.
Fill fresh engine oil into the oil filling opening. Refer to Specifi-
cations for oil quantity and quality. Use a funnel or a similar de-
vice to fill the oil reservoir.
Replace the oil filler plug (2) and tighten it.
Only change oil while the engine is still warm, but not hot – dan-
ger of burns!
agria Grassland Mower 5300

Engine

Checking Oil Level
Each time you take up operation and af-
ter every 5 operating hours.
Check only with engine switched off and
machine in horizontal position.
Clean oil filler plug (B/11) and surrounding
parts.
Unscrew oil filler plug.
Oil level must reach the filling opening,
refill oil, if oil level is lower than described (see
"Specifications") – Do not overfill!
Screw oil filler plug back in and tighten.