Advertisement
Quick Links
Valentine_308
Valentine 308
Remote controls:
Remote controls for the AV system are located in the AV podium at the front of the classroom.
Light:
Lighting controls are located at the front of the classroom.
Fluorescent lighting should be used for general classroom presentations and is controllable from the
switches at the front of the classroom. The lighting is zoned to provide localized lighting which minimizes
the washout of images on the front projection screens.
Dimmable incandescent lighting controls are located at the front of the classroom. These lights are
recommended whenever projected materials are used in the room.
Troubleshooting/HELP!!!
If all else fails, call ITTT at ext 3037 (Monday -Friday 9am to 5pm) or send an e-mail to items@ltsg.edu
1 of 9
9/2/03
2:44 PM
Advertisement
Related Manuals for Samsung SV5000
Summary of Contents for Samsung SV5000
- Page 1 Valentine_308 Valentine 308 Remote controls: Remote controls for the AV system are located in the AV podium at the front of the classroom. Light: Lighting controls are located at the front of the classroom. Fluorescent lighting should be used for general classroom presentations and is controllable from the switches at the front of the classroom.
- Page 2 3. Power on the Samsung VCR with the power button located on the left side of the unit. 4. Press the NTSC button located to the right of the front display panel.
- Page 3 Valentine_308 I want to play a CD or audiocassette with the Denon CD/cassette player. 1. Turn on the audio amplifier with the “Standby/On” switch located on the left side of the unit. Select the “VCR” input (input A) on the Yamaha audio amplifier and adjust the volume knob. NOTE: For troubleshooting assistance, see the “Adjusting Audio FAQ’s”...
- Page 4 Valentine_308 I want to access some computer resources such as Web pages, network files, Powerpoint files, audio CDs, DVD disks, or CD-ROMs. 1. Power up the LCD projector with the projector remote control. NOTE: Make sure the remote control power switch (left hand side) is in the 'on' position. 2.
- Page 5 Valentine_308 I want to connect a portable laptop computer to the LCD projector. 1. Connect the VGA cable located on side of the podium to your portable laptop computer. Troubleshooting tip: The external VGA port is typically located at the back of the Laptop under the LCD display.
- Page 6 Valentine_308 Laptop Computer Connection FAQ’s. Connect the VGA cable to the back of the computer. 15 pin VGA video cable 6 of 9 9/2/03 2:44 PM...
- Page 7 Valentine_308 After you have securely connected the VGA cable to the back of the laptop, toggle the video settings of the laptop by holding down the "Fn" key and tapping the "F8" key. NOTE: Some laptop computers us the "F5" key in conjunction with the "Fn"...
- Page 8 Valentine_308 LCD Projector FAQ’s. The LCD projector in this electronic classroom is capable of projecting PC and Macintosh computer video signals. The projector is rated at 2000 ANSI lumens, and is optimized to display XGA (1024 x 768) signals. The unit will also accept and project VGA (640 x 480), and VGA (800 x 600) resolutions.
- Page 9 Valentine_308 Audio Troubleshooting FAQ’s. Turn on the audio amplifier with the “Standby/On” switch located on the left side of the unit. NOTE: Make sure the RED light over the “Standby” switch is not lit. If it is, push the “Standby” button one time. The Orange power light should activate. If it doesn’t, try pushing the “Power”...