Real Time Logger
The Imager includes a Real Time Logger application that logs events, errors, exceptions and software diagnostics
of the Imager during its operation. Each log record has a time stamp with a 1ms resolution. The logger time is
synchronized with the host computer's time. The log is retained only after warm boot. The log memory size is 4 MB
and operates in a cyclic way.
Figure 4-13
shows the Real Time Logger file content as shown on a host computer screen.
Real Time Logger Content Screen
Figure 4-13
ScannerLog Application
NOTE When ScannerLog Application is used with a corded connection. Open the ScannerLog application while
the scan application is still running.
Perform a warm boot (see
1.
Select the Imager ScannerLog application from the Application folder.
2.
ScannerLog Application icon on WT4090 screen
ScannerLog Application Icon
Figure 4-14
Warm Boot on page
1-17)
ScannerLog Application icon on Windows Mobile screen
RS507 Update and Configuration 4 - 15