How To Pair And Connect With A Computer Running Windows Xp Sp3 And Bluetooth 2.1 - Motorola RS507-IM2xxxxSTWR Product Reference Manual

7 - 6 RS507 Product Reference Guide

How to pair and connect with a computer running Windows XP SP3 and Bluetooth 2.1

For best user experience it is recommended to use Secure Simple Pairing (SSP) that is supported in BT V2.1. SSP
reduces the number of steps to minimal or none when compared to legacy BT pairing.
To pair and connect with a computer:
Verifying that Windows XP Service Pack 3 (SP3) is installed.
1.
Since Windows XP does not support BT V2.1, load new BT stack that supports BT V2.1 by either:
2.
Following the instructions on the Broadcom site at:
3.
and install the WIDCOMM stack.
Purchasing an off-the-shelf USB Bluetooth dongle that supports BT V2.1 and installing the provided BT V2.1
4.
drivers. Using USB Bluetooth dongle is the only option if the computer does not include an integrated BT
module. When using earlier BT versions, you will need to enter passkey 12345 or disable authentication by
scanning:
Disable Authentication bar code
Pair and connect the RS507 as follows:
Right click the BT icon on the computer desktop tray.
1.
BT Icon
HID - BT Icon On Computer Desktop Tray - Windows XP SP3 and Bluetooth V2.1
Figure 7-5
Or
From My Bluetooth Places > Bluetooth Tasks bar, select Add a Bluetooth Device.
HID - My Bluetooth Places Screen - Windows XP SP3 and Bluetooth V2.1
Figure 7-6
http://www.broadcom.com/support/bluetooth/update.php
Add a Bluetooth Device