Keypad Programming; Monitor [Mon - BK Radio P150 User Manual

when "Lock All Controls" is selected: Front keypad, side top buttons,
toggle switches, channel knob, collar switch and push-to-talk.
To enable the lock function press the assigned button or open the menu
and select Control Lock from the list.
Select the desired lockout setting and press "ENTER"
To disable Control Lock press the diamond button twice, then the
square button twice.

Keypad Programming

Conventional Systems and Channels
Much of the information stored in the KNG can be edited using the
keypad. Four separate programming functions can be enabled with the
PC Radio Editor software.
Keypad programming selections can only be assigned as a menu item.
Refer to the Keypad Programming section for detailed information on
how to edit programmed radio information.

Monitor [MON]

Conventional Channels
There are four settings available for monitoring traffic on a selected
channel. "Monitor" can be assigned to a button or as a menu item.
Monitor Modes and Indicators
Selective - Digital channels only. Required for Unit-to-Unit calls and
Talkgroup use. (No indicator)
Normal - Requires NAC or Tone. Ignores Talkgroup and Unit-to-
Unit information on digital channels. Flashing
Monitor - Monitors activity on selected channel. Steady
Open - Open Squelch. Solid
Button Operation - Press the button to cycle to the next mode. Press
and hold for Open Squelch. Availability of "Selective" or "Normal" is
determined by each channel's programmed Squelch Operation setting.
Menu Operation - Open the Monitor menu, select the desired operation
and press "Enter".
KNG Portable Radio User's Manual
on.
- 43 -
Contents
on.
on.