Page 2
Contents seCtion i General information 1.1 introduction ........................1-1 1.2 Description ........................1-1 1.3 technical Characteristics ....................1-1 1.4 factory options ....................... 1-3 1.5 accessories ........................1-3 1.6 license requirements ....................1-3 1.7 radio Controls ......................... 1-4 1.8 lCD Display ........................1-4 Status Indicators ..........................1-5 Alphanumeric Label Options ......................1-6 1.9 Programmable switches and Buttons ................
Page 3
Contents 2.3 radio functions and setup .................... 2-3 radio Controls ..........................2-3 Button Options and Labels ......................2-4 Keypad Menu Operation .......................2-4 Channel/Zone Selection Options ....................2-5 Display options ..........................2-8 Command Zones ..........................2-10 Building a Command Zone [CHAN+] ..................2-10 Editing a Command Zone [CHAN-] ....................2-10 Code Guard and network access Codes ..................
Page 4
Contents Nuisance Channel [NUIS] ......................2-34 Radio Information ........................2-34 Repeater Talkaround [T/A] ......................2-35 Squelch Adjust [SQL] ........................2-35 Site Display [STDS] ........................2-35 Site Lock [STLK] .........................2-35 Site Search [STSR] ........................2-36 Surveillance Mode [SUR] ......................2-36 Transmit Digital [TXD/A] ......................2-36 Transmit Power [PWR] .......................2-37 2.4 Programming options ....................
Page 5
Contents seCtion iV maintenanCe 4.1 introduction ........................4-1 4.2 overhaul ........................... 4-1 4.4 radio test Procedures ....................4-2 seCtion V illUstrateD Parts list 5.1 introduction ........................5-1 5.2 Parts list Description ...................... 5-1 5.3 assembly Drawing symbols ................... 5-1 5.4 interconnect Diagram ..................... 5-2 5.5 final assembly .........................
Page 6
Contents 5.8 rx/tx assembly ......................5-11 Parts List ............................5-11 Assembly Diagram .........................5-13 5.9 system Board ......................... 5-17 Parts List ............................5-17 Parts Placement ..........................5-33 Schematics ............................5-35 5.10 P-150 rx/tx Board ....................... 5-55 Parts List ............................5-55 Parts Placement ..........................5-71 Schematics ............................5-73 5.11 P-400 rx/tx Board ....................... 5-83 Parts List ............................5-83 Parts Placement ..........................5-99 Schematics ..........................5-101...
Page 8
General information 1.1 introDUCtion This manual contains information about the physical, mechanical, and electrical characteristics of the BK Radio KNG Series APCO Project 25 portable digital radios. KNG Portable radios are available in VHF, UHF and 800 MHz models. models...
Page 9
Contents General information maX CUrrent Drain: ..........Transmit High Power: 1.5 amps Receive: 255 mA Standby: 20 mA (battery save on) Standby: 100 mA (battery save off) oPeratinG temPeratUre: ........-30° to +60° C Receive: Standby: 150 mA oPeratinG temPeratUre: ........-30°...
Page 10
This equipment must be licensed by the Federal Communications Commission (FCC) before it may be used. Your BK Radio dealer can assist you in filing the appropriate application with the FCC and program each radio with your authorized frequencies and signaling codes.
Page 11
XD Ch 1 Check with your RELM/BK Radio K N G - P15 0 Programmable alphanumeric labels dealer or communications officer 171. 5 8 5 0 0 M H z...
Page 12
Priority 1 Channel, Priority 2 Channel Scanned Channel Channel Scan On Dual Mode Scan On Zone Scan On Priority Scan On Repeater Talkaround Enabled Monitor Mode Flashing indicates Normal Mode in digital operation Open Audio Voice Mute Enabled BK Radio Page 1-5...
Page 13
Contents General information alPHanUmeriC laBel oPtions NOTE: Three channel information lines are programmable with PC Radio Editor. Channel Number Channel Number of Currently Selected Channel or Active Scanned Channel Channel Label Alphanumeric Label of Currently Selected Channel or Active Scanned Channel Channel Number and Currently Selected Channel number and Currently Selected Zone Label Zone Label...
Page 14
Software. The programmed functions are activated by pressing the associated button. Active functions are indicated by a highlighted background. = Active, = Inactive. Side Buttons Collar Switch Right Toggle BK RADIO SCAN SCAN Orange Button Left Toggle Diamond Square Down...
Page 15
** Trunking Channels Only. Requires P25 Trunking option. 1.10 serViCe information If you need service, contact your local BK Radio dealer equipped to service your radio. If you find it impractical to have service performed by your local dealer, contact BK Radio at the address below:...
Page 16
All information programmed into the radio is maintained even when the battery pack is removed. BK Radio battery packs are available in a variety of capacities and types for special applications. Rechargeable battery packs can be charged separately or while attached to a radio.
Page 17
NOTE: Transmitting without an antenna could result in damage to your radio. Use RELM/BK Radio approved antennas only. Use of non-qualified or mismatched antennas could result in diminished radio operation. Published radio specifications cannot be guaranteed with non- approved antennas.
Page 18
2. Talk in a normal voice with the microphone one to two inches from your mouth. 3. Release the PTT switch to stop transmitting. BK RADIO If the length of your message is nearing the programmed Time-Out Timer setting, a tone sounds indicating 5 seconds left to transmit. At the end of the programmed time, the transmitter automatically shuts off and an alert tone sounds.
Page 19
Editor Software. The programmed functions are activated by pressing the associated button. Active functions are indicated by a highlighted background. = Active, = Inactive. Side Buttons Collar Switch Right Toggle 7 8 9 7 8 9 BK RADIO SCAN SCAN Orange Button Left Toggle Diamond Square Down PQRS...
Page 20
Accessing a channel or zone depends on radio programming. Channels or zones can be selected using the channel/zone select knob, by an assigned button or menu item or by direct keypad entry. More than one selection mode can be programmed. BK Radio Page 2-5...
Page 21
Contents operation and Programming Channel/Zone selector Knob When programmed with the default setting, the channel/zone knob is used to select a channel (1-16) from the active zone. If programmed to select zones, zones (1-16) will be selected with the knob. Channels or zones above sixteen can only be accessed via button, menu or keypad selection.
Page 22
Highlight the desired item in the “Assigned” box. Use the “Up/Down” buttons to move the selected item. To remove items from the list: Highlight the desired item in the “Assigned” box. Click “<” to remove. (Click “<<” to remove all programmed items. BK Radio Page 2-7...
Page 23
Contents operation and Programming Channel/Zone Knob and Keypad select options Knob and keypad options are found in the “Other” box under the “Global/Common/General” tab. Channel Knob selects Zone Check to use the Channel Knob as a Zone Select Knob. Channel soft stop (CMD Models Only) When checked, radios with a continuous channel select switch will stop on the highest or lowest programmed channel.
Page 24
NAC, TGID or Code Guard currently selected from the programmable Pick Lists selection* Zone label Label of Currently Selected Zone Zone # and Currently Selected Zone and Channel Numbers Channel # Zone number Currently Selected Zone Number rX/tX Key Currently selected encryption key BK Radio Page 2-9...
Page 25
Contents operation and Programming alphanumeric label options subaudible* Displays CxCSS value of received signal Dtmf* Displays the numeric DTMF tones of received signal mDC* Displays the numeric MDC ID of received signal *Conventional Channels Only setup To assign displayed line information: 1.
Page 26
Talk Group ID (TGID). Group Calls are made by designating both the users’ NAC and TGID. Each radio also has an individual P25 unit ID. A Unit-to-Unit call contains the addressee’s NAC, and uses the addressee’s P25 unit ID instead of the TGID. BK Radio Page 2-11...
Page 27
Contents operation and Programming When operating in Digital Mode, each channel can be programmed to use either Normal squelch or Selective squelch. Normal squelch is used to mimic analog operation. Signals are only qualified with the programmed NAC. TGIDs and P25 Unit IDs are ignored. Each digital channel is programmed with a receive NAC and a transmit NAC.
Page 28
Once the signal ends, the radio continues to monitor the channel for the preset scan delay time before it resumes scanning. Channel Scan operation can be a switch or as a button or menu list item. Channel Scan may be used in conjunction with Priority Scan operation (see Priority Scan). BK Radio Page 2-13...
Page 29
Contents operation and Programming scanning Code Guarded Channels Conventional Analog Channels When a signal is detected, scanning stops while the radio checks for the proper Code Guard value. If the signal contains the proper Code Guard value, the radio receives the message. Otherwise, the radio resumes scanning immediately.
Page 30
If not checked, all vote scan channels must be fully qualified before they can be voted, and the vote is based on full qualification and RSSI. Display Selected Channel - If checked only the knob channel will be displayed when vote scan is active. BK Radio Page 2-15...
Page 31
Contents operation and Programming DUal moDe sCan [DsCn] Conventional and Trunking Channels Dual Mode scan provides the ability to scan trunking and conventional channels simultaneously. note: the Dual mode scan list must be setup using the PC radio editor and cannot be changed by the radio user.
Page 32
The display will return to the main Priority Channel Select menu. setup Priority scan rate To set the priority sample rate: Open the “Global/Conventional/Features” tab. Under “Scan” use the drop box to select the desire interval. BK Radio Page 2-17...
Page 33
Contents operation and Programming system wide Priority Channels To assign system wide priority channels: Open the “System/Common/General” tab. Under “Priority 1” or “Priority 2” uncheck the Disable box. Select the “Use Main Channel” box to use the knob selected channel as the priority channels or...
Page 34
If allowed, picklist values can be changed through keypad programming. setup To create a Code Guard Picklist: Open the “System/Conventional/Code Guard Picklist” tab. Use the drop box to select the desire value. Use the “Invert DCS” box to invert digital code guards as necessary. BK Radio Page 2-19...
Page 35
Contents operation and Programming allow Code Guard selection on all Channels If unchecked, only channels with a programmed value of “None” will be selectable. Channels with a programmed Code Guard will be locked to that value. tX/rX networK aCCess CoDe PiCKlist [tnaC] [rnaC] Conventional Digital or Mixed Mode Channels Selecting a Network Access Code (NAC) from the Pick List will assign the NAC to the currently select digital or mixed-mode channel.
Page 36
Press Enter to enter Unit Call Mode. The LCD displays the ID number or associate label of the targeted radio. Press the PTT button to send the unit-to-unit call. To exit the Individual Call mode press “Exit”. BK Radio Page 2-21...
Page 37
Contents operation and Programming If there is no response to the call after 60 seconds, the radio exits the Unit-to-Unit mode and returns to normal operation. Receiving an Individual Unit Call When a properly addressed unit call is received, an alert tone sounds and the LCD displays the ID number or associate label of the radio placing the call.
Page 38
Tries - Number of time the emergency information is sent. Polite - Obeys busy channel lockout rules. Impolite - Transmits regardless of busy channel status. BK Radio Page 2-23...
Page 39
Contents operation and Programming trunking system Open the “Global/P25 Trunking/ Buttons” tab and assign “Emergency” to the orange button. Open the “System/P25 Tunking/ General” In the “Emergency” box select the desired emergency options. Alarm None - No emergency alarm. Normal - Alarm will inform a console and other radio users of emergency transmission.
Page 40
The top programmed display line will alternate between the programmed setting and “Text Message” until the message is read. Reading the message To read the message press the “TXT” button or select ‘Text Message” from the menu. Select “Read” to view the message BK Radio Page 2-25...
Page 41
Contents operation and Programming stored messages Up to five messages can be programmed into the “Manual Entry List” and are accessed from the “Select Entry Type” menu. To store a manually entered text message press the “TXT” button or select “Text Message” from the menu.
Page 42
Press “OK” or wait for five seconds to return to normal radio operation. receiving a status Update When an incoming status update is received an alert tone is sounded and the status message is momentarily displayed before returning to normal operation. BK Radio Page 2-27...
Page 43
Contents operation and Programming setup Assign “User Status” to a button or as a menu item. Open the “System/Conventional/User Status” tab. Click “Add” to add a stored message. In the “Alias” column, enter the text to be displayed when message is read. In the “ID”...
Page 44
Select the desired target radio and press “Enter” to send the Call Alert. Unit iD Select “Unit ID” to enter the ID of the target radio. Use the keypad to enter the ID then press “Enter” to send the Call. BK Radio Page 2-29...
Page 45
Contents operation and Programming receiving a Call alert When a Call Alert is received, an alert tone will sound and the incoming unit ID or alias is displayed for approximately 5 seconds. The top display line will alternate between the programmed display information and a Call Alert Received message.
Page 46
In the “Other” box select “Radio Inhibit”. To allow a radio to send “Inhibit/Uninhibit” commands: Assign “Inhibit’ and/or “Uninhibit” to a button or as a menu item. Open the “System/Conventional/General” tab. In the “Other” box select “Radio Inhibit”. BK Radio Page 2-31...
Page 47
Contents operation and Programming otHer raDio fUnCtions Backlight [lite] Conventional and Trunked Channels Backlight on/off control can be assigned to a switch, button or as a menu item. In addition, backlighting may be programmed to illuminate when any key is pressed. setup Open the “Global/Common/General”...
Page 48
To disable Control Lock press the diamond button twice, then the square button twice. setup Open the “Global/Common/General” tab. In the “Control Lockout Enables” box select operation to be locked when “All Control Lock” is on. BK Radio Page 2-33...
Page 49
Contents operation and Programming monitor [mon] Conventional Channels There are four settings available for monitoring traffic on a selected channel. “Monitor” can be assigned to a button or as a menu item. monitor modes and indicators Selective - Digital channels only. Required for Unit-to-Unit calls and Talkgroup use. (No indicator) Normal - Requires NAC or Tone.
Page 50
Site lock prevents the radio from searching for other sites by locking it to the currently selected site. Site Lock can be assigned as a button or menu list item. setup “Site Lock” can be assigned as a button, switch or menu item. BK Radio Page 2-35...
Page 51
Contents operation and Programming site search [stsr] Trunking Channels Site Search automatically searches and selects the best available trunking site. Site Lock can be assigned as a button or menu list item. setup “Site Lock” can be assigned as a button, switch or menu item. surveillance mode [sUr] Conventional and Trunking Channels When Surveillance Mode is on, all audible indicators (beeps etc.) and lighting functions (LEDs and...
Page 52
- Transmit power is selected with the assigned button, switch or menu selection. 2.4 ProGramminG oPtions There are three different ways to program BK Radio radios: • BY COMPUTER With a computer, KNG programming software, and an interface cable. Contact BK Radio for the required programming cable and software.
Page 53
Contents operation and Programming KeyPaD ProGramminG naViGation While in programming mode the diamond, arrow up, arrow down and square buttons are used navigate the programming functions. The following table shows possible button functions: Keypad Programming Buttons Opens the highlighted function or enters the displayed information Press once to go back to previous screen or hold to exit programming mode and return to normal radio operation neXt...
Page 54
To designate a specific priority channel choose “Select” from the priority channel menu. Select the Zone and Channel. tx on Priority 1 Channel If on, the radio will transmit on the System Priority 1 channel whenever Priority Scan is on. BK Radio Page 2-39...
Page 55
Contents operation and Programming Zone settinGs To edit the programmable Zone settings, select “Keypad” from the programing menu then select “Zone” from the sub-menu. Select Add, Delete or Edit Zone from the Zone menu. add Zone When selected, a new zone is added in the next available slot. Example: If there are seven zones in the radio, the added zone will be zone eight.
Page 56
Choose “Select” to use a receiver NAC from the programmed pick list. squelch mode Digital or Mixed Mode Receive Channels Only normal - Requires carrier and NAC only to unmute digital signals. selective - Required for Individual Calls and use of Talkgroup IDs. BK Radio Page 2-41...
Page 57
Contents operation and Programming Bandwidth Analog or Mixed Mode Channels Only narrowband - 12.5kHz spacing when operating in analog. wideband - 25kHz spacing when operating in analog. tx Power low Power - Lock channel in low power mode. High Power - Lock channel in high power mode. selectable - Allow high/low transmit power selection form assigned button, switch or menu item.
Page 58
241.8 141.3 (4A) * 50/60 Hz power distribution systems could cause falsing. The assignments in a given area should be made from within one of the Groups: A, B, or C. Valid Digital Code Guard Values BK Radio Page 2-43...
Page 59
Contents operation and Programming User seleCtaBle networK aCCess CoDes The KNG can be pre-programmed with up to 32, user selectable NACs. NACS are selected via a programmed button or menu item (see TX/RX Network Access Code Picklist). If enabled, the tones can be programmed via the radio’s keypad.
Page 60
If “Cloning” is programmed as a menu item, any Source radio (a KNG with the desired radio frequencies and settings) is capable of transferring its program to another KNG of the same frequency range. In addition, information between a KNG-P150 and certain other BK Radio models radio can be cloned. (See “KNG to Legacy Radio Cloning” below.) The KAA0701 Cloning Cable offers radio users to ability to share programmed information between KNG portable and mobile radios and/or other BK Radio legacy models.
Page 61
Contents operation and Programming sending information On the source radio: C h 1 Press the Menu button. K N G - P 25 171. 5 8 5 0 0 M Hz Use the up/down buttons to select “Cloning”. Zone tXaD menU Press the [ENT] button to send the cloning information.
Page 62
KNG-S and Legacy target radios do not display any error messages. KNG Target leGaCy raDio CloninG Information programmed in some older BK Radio models can be cloned to KNG models. Cloning compatible models include: DPHX5102X, GPH5102XP, DPHX-CMD, GPH-CMD, DMH, GMH Plus and most GPH portable models.
Page 63
Contents operation and Programming Command radio model target selection When using a DPH-CMD or GPH-CMD radio as a cloning source you PRG TX RX SCN D CMND PROG|D/GPH-CMD must designate the target as a G/DPH-CMD not a standard G/DPH. Press home channel and hold the [ ] key to select “PRG | D/GPH”.
Page 64
User Password Set to 000000 Set to 000000 encryption Parameters encryption Parameters DPHX/DmHX KnG-s encrypted/Clear/switchable Set to Clear encryption Key/Key lock “Entire Radio Cloning” only. BK Radio Page 2-49...
Page 65
Contents operation and Programming KnG as target radio source radio type DPHX DPHX 5102X 5102XP GmHP KnG-s Channel and Zone labels rX/tX frequencies ...
Page 66
3.1 introDUCtion This section contains a description of equipment and a theory of operation for the BK Radio KNG Series APCO Project 25 digital radio. To aid in understanding the operation of the equipment, schematic diagrams are found in Section 5 of this manual.
Page 67
Contents theory of operation Core microprocessor The core microprocessor communicates with the baseband signal processor, the LCD display and the battery. It controls radio functions such as adjusting the deviation and receiver tuning. The microprocessor communicates with the EEPROM on the RF board to access the stored calibration and tuning data that is unique to each radio.
Page 68
The Synthesizer section has circuits that perform many functions including frequency generation, modulation and buffering. The main functional blocks in the transmitter are: • TCXO frequency reference • Synthesizer IC • Loop Filter • Rx VCO • Tx VCO • Digital Potentiometer • VCO Buffer BK Radio Page 3-3...
Page 69
Contents theory of operation Programming Coarse Tune TCXO Reference Rx VCO Loop Filter 10 MHz VCO Buffer Steering Line Synthesizer Tx VCO Tx / Rx Tx / Rx Coarse Tune Coarse Tune Tx Audio RX VCO TX VCO 181-219 MHz (P150) 136-174 MHz (P150) Digital From uP...
Page 70
RF signals to flow to the Receiver with the Transmitter output port removed from the circuit. The Harmonic Filter attenuates the harmonics created by the Power Amplifier to meet or exceed the transmit spurious and harmonic specification. The passband input and output impedances of the filter are 50 Ohms. BK Radio Page 3-5...
Page 71
Contents theory of operation receiver The receiver section consists of many circuits which perform a variety of tasks including filtering, impedance matching, mixing, and analog-to-digital conversion. The main blocks of the receiver are: • Tunable Preselector • Low Noise Preamplifier •...
Page 72
The bits are then formatted and stored in a buffer in preparation for transfer via the SSI to the radio’s microprocessor. Ultimately, the sampled data is transferred to the microprocessor at 19.2 k samples per second with 16 bits of data per sample. BK Radio Page 3-7...
Page 73
Contents theory of operation Page 3-8 Service Manual - KNG Portables...
Page 74
1. Disconnect the flex circuits connecting the Systems Board to the side connector and display assembly. 2. Disconnect the speaker. 3. Remove the two screws holding the Systems board to the housing. 4. Lift the board from the top to remove. BK Radio Page 4-1...
Page 75
Contents maintenance sHielDs Most shield on the KNG are press on type and can be removed by gently prying the lid. Some require unsoldering before removal. CleaninG Using a clean, lint-free cloth, lightly moistened with soap and water only, and remove the foreign matter from the equipment case and unit front panel.
Page 76
MODULATION RADIO COUNTER METER COMMUNICATIONS TEST SET (SERVICE MONITOR) AUDIO 50 OHM RF IN LOAD RF POWER METER TEST AUDIO GENERATOR OPTIONAL 10 VDC ANTENNA MIC. AUDIO REGULATED POWER SUPPLY RADIO figure 4-2 transmitter tests setup BK Radio Page 4-3...
Page 77
Contents maintenance OPTIONAL RADIO COMMUNICATIONS AUDIO TONE TEST SET GENERATOR GENERATOR (SERVICE MONITOR) AUDIO IN RF OUT SINAD SIGNAL GENERATOR OPTIONAL SINAD METER TEST DISTORTION ANALYZER 10 VDC ANTENNA EXT. SPEAKER REGULATED POWER SUPPLY RADIO figure 4-3 receiver tests setup Page 4-4 Service Manual - KNG Mobiles...
Page 78
Parts list 5.1 introDUCtion This section helps you identify parts used in BK Radio’s KNG Portabl radios. It includes Replacement Parts Lists for all major assemblies arranged from the Final Assembly down to an individual part level. Each List is followed by the corresponding Assembly Drawing (if required), Schematic Diagram and Parts Placement.
Page 79
Contents illustrated Parts lists 5.4 interConneCt DiaGram Accessory Connector 16 17 Flex Circuit 1700-60280-201 17 18 SYN CLK SYN DATA -SYN CS LATCH LOCK DETECT RX AUDIO + RX AUDIO - DPTT -DACS CS 3.3 V SPI MISO DATA X2/CLK IN SPI CLK SPI MOSI DATA - IF CS...
Page 80
QTY 4 1602-31004-500 TAPE-FOAM, B-B FLEX CONNECTOR 1700-60284-200 FLEX CIRCUIT, BOARD TO BOARD KAA0400 BELT CLIP ASSY, KNG 1411-31003-000 PLUG-KNOB, RUBBER 1411-31003-001 PLUG-KNOB, RUBBER, CH-SELECT Battery Pack NOTES: 1. Flex Strip connects to J1 on RX/TX Board BK Radio Page 5-3...
Page 82
Speaker, 40mm, 8 Ohms SCAN NOTES: 1 Speaker included as part of ITEM 1 *Front case assemblies includes: Display lense and keypad, on applicable models, speaker and orange top button PQRS WXYZ Tier 2 7011-31006-901 Tier 3 7011-30994-501 BK Radio Page 5-5...
Page 86
2 tems 4 & 5 Must be soldered to the their respective fences. 3. Item 7 must be installed before installing Item 6 to the connector. 4. Item 7 must be properly aligned to the board-to-board connector to avoid damage to the board during installation. BK Radio Page 5-9...
Page 90
Parts lists See Detail A P150 Shown see Detail B (page 2) for other model information TOP SIDE DETAIL A Attach finger stock (ITEM 22) to shield with solder. Systems Board Assembly Page 1 of 2 BK Radio Page 5-13...
Page 92
On UHF models the ground straps (ITEM 8) are replaced by a shield (ITEM 20). This shield is bridged to the Front-End shield (ITEM 16) via the shield bridge (ITEM 21) and secured by solder. Systems Board Assembly Page 2 of 2 BK Radio Page 5-15...
Page 110
8888-31008-100 KNG-Portable Systems Board THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF Sheet 1 of 1 Rev. C PRODUCTS WITHOUT PERMISSION BK Radio Page 5-33...
Page 111
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-34 Service Manual - KNG Mobiles...
Page 112
3333-31008-100 KNG-P Sytems Board THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE Sheet 1 of 10 Rev. C BASIS FOR THE MANUFACTURE OR SALE OF PRODUCTS WITHOUT PERMISSION BK Radio Page 5-35...
Page 113
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-36 Service Manual - KNG Mobiles...
Page 114
KNG-P Sytems Board ACC_PWR_FAULT THIS DRAWING IS PROPERTY OF RELM AND SHALL [1,3] NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF Sheet 2 of 10 Rev. C PRODUCTS WITHOUT PERMISSION BK Radio Page 5-37...
Page 115
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-38 Service Manual - KNG Mobiles...
Page 116
KNG-P Sytems Board JTAG_EMU1 THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF Sheet 3 of 10 Rev. C PRODUCTS WITHOUT PERMISSION BK Radio Page 5-39...
Page 117
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-40 Service Manual - KNG Mobiles...
Page 118
KNG-P Sytems Board THIS DRAWING IS PROPERTY OF RELM AND SHALL ANALOG_SW_MUX3 NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF NLU1G14 Sheet 4 of 10 Rev. C PRODUCTS WITHOUT PERMISSION 3134-30735-009 BK Radio Page 5-41...
Page 119
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-42 Service Manual - KNG Mobiles...
Page 120
KNG-P Sytems Board TPS65950 THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF Sheet 5 of 10 Rev. C PRODUCTS WITHOUT PERMISSION BK Radio Page 5-43...
Page 121
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-44 Service Manual - KNG Mobiles...
Page 122
3333-31008-100 KNG-P Sytems Board THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF Sheet 6 of 10 Rev. C PRODUCTS WITHOUT PERMISSION BK Radio Page 5-45...
Page 123
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-46 Service Manual - KNG Mobiles...
Page 124
3333-31008-100 KNG-P Sytems Board THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF Sheet 7 of 10 Rev. C PRODUCTS WITHOUT PERMISSION BK Radio Page 5-47...
Page 125
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-48 Service Manual - KNG Mobiles...
Page 126
3333-31008-100 KNG-P Sytems Board THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF Sheet 8 of 10 Rev. C PRODUCTS WITHOUT PERMISSION BK Radio Page 5-49...
Page 127
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-50 Service Manual - KNG Mobiles...
Page 128
3333-31008-100 KNG-P Sytems Board THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF Sheet 9 of 10 Rev. C PRODUCTS WITHOUT PERMISSION BK Radio Page 5-51...
Page 129
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-52 Service Manual - KNG Mobiles...
Page 130
3333-31008-100 KNG-P Sytems Board THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF Sheet 10 of 10 Rev. C PRODUCTS WITHOUT PERMISSION BK Radio Page 5-53...
Page 131
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-54 Service Manual - KNG Mobiles...
Page 147
Contents illustrated Parts lists Parts List, Rx/Tx Board, KNG P-150 Portable reference Part number Description notes 3134-30911-007 IC,Cmprtr,Push/Pull,MCP6561T- E/OT,SOT-23-5 U602 3134-30950-304 IC,REG,ADJ,LDO,100ma,TPS79101DBV,SOT-23 U603 3134-30950-304 IC,REG,ADJ,LDO,100ma,TPS79101DBV,SOT-23 U604 3134-30906-202 IC,SW,SPST,MAX4520EUT-T,SOT23-6 U605 3134-30577-404 IC,Freq_Syn,CX72301-11,TSSOP 2390-30957-104 TCXO,19.6608MHz,+/-2.5PPM, 2.5x3.2mm,SMD 2390-30957-103 TCXO, 10.00MHz,+/-1.5PPM, 2.5x3.2mm,SMD Page 5-70 Service Manual - KNG Mobiles...
Page 148
8888-30976-500 THIS DRAWING IS PROPERTY OF RELM AND SHALL KNG-P150 RT Board NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF PRODUCTS WITHOUT PERMISSION Sheet 1 of 1 Rev. D9 BK Radio Page 5-71...
Page 149
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-72 Service Manual - KNG Mobiles...
Page 150
P-150 rx/tx Board 3333-30976-500 THIS DRAWING IS PROPERTY OF RELM AND SHALL KNG-P150 RT Board NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF PRODUCTS WITHOUT PERMISSION Sheet 1 of 5 BK Radio Page 5-73...
Page 151
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-74 Service Manual - KNG Mobiles...
Page 152
P-150 rx/tx Board 3333-30976-500 THIS DRAWING IS PROPERTY OF RELM AND SHALL KNG-P150 RT Board NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF PRODUCTS WITHOUT PERMISSION Sheet 2 of 5 BK Radio Page 5-75...
Page 153
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-76 Service Manual - KNG Mobiles...
Page 154
P-150 rx/tx Board 3333-30976-500 THIS DRAWING IS PROPERTY OF RELM AND SHALL KNG-P150 RT Board NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF PRODUCTS WITHOUT PERMISSION Sheet 3 of 5 BK Radio Page 5-77...
Page 155
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-78 Service Manual - KNG Mobiles...
Page 156
P-150 rx/tx Board 3333-30976-500 THIS DRAWING IS PROPERTY OF RELM AND SHALL KNG-P150 RT Board NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF PRODUCTS WITHOUT PERMISSION Sheet 4 of 5 BK Radio Page 5-79...
Page 157
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-80 Service Manual - KNG Mobiles...
Page 158
P-150 rx/tx Board 3333-30976-500 THIS DRAWING IS PROPERTY OF RELM AND SHALL KNG-P150 RT Board NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF PRODUCTS WITHOUT PERMISSION Sheet 5 of 5 BK Radio Page 5-81...
Page 159
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-82 Service Manual - KNG Mobiles...
Page 176
P-400 rx/tx Board 8888-30976-600 KNG-P400/P500 RT Board THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF Sheet 1 of 1 PRODUCTS WITHOUT PERMISSION BK Radio Page 5-99...
Page 177
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-100 Service Manual - KNG Mobiles...
Page 178
3333-30976-600 KNG-P400 RT Board THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF Sheet 1 of 5 Rev. G PRODUCTS WITHOUT PERMISSION BK Radio Page 5-101...
Page 179
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-102 Service Manual - KNG Mobiles...
Page 180
3333-30976-600 KNG-P400 RT Board THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF Sheet 2 of 5 Rev. G PRODUCTS WITHOUT PERMISSION BK Radio Page 5-103...
Page 181
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-104 Service Manual - KNG Mobiles...
Page 182
3333-30976-600 KNG-P400 RT Board THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE Sheet 3 of 5 Rev. G BASIS FOR THE MANUFACTURE OR SALE OF PRODUCTS WITHOUT PERMISSION BK Radio Page 5-105...
Page 183
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-106 Service Manual - KNG Mobiles...
Page 184
3333-30976-600 KNG-P400 RT Board THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE Sheet 4 of 5 Rev. G BASIS FOR THE MANUFACTURE OR SALE OF PRODUCTS WITHOUT PERMISSION BK Radio Page 5-107...
Page 185
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-108 Service Manual - KNG Mobiles...
Page 186
3333-30976-600 KNG-P400 RT Board THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE Sheet 5 of 5 Rev. G BASIS FOR THE MANUFACTURE OR SALE OF PRODUCTS WITHOUT PERMISSION BK Radio Page 5-109...
Page 187
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-110 Service Manual - KNG Mobiles...
Page 204
P-500 rx/tx Board 8888-30976-600 KNG-P400/P500 RT Board THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF Sheet 1 of 1 PRODUCTS WITHOUT PERMISSION BK Radio Page 5-127...
Page 205
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-128 Service Manual - KNG Mobiles...
Page 206
3333-31005-200 KNG-P500 RT Board THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF Sheet 1 of 5 Rev. D PRODUCTS WITHOUT PERMISSION BK Radio Page 5-129...
Page 207
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-130 Service Manual - KNG Mobiles...
Page 208
3333-31005-200 KNG-P500 RT Board THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF Sheet 2 of 5 Rev. D PRODUCTS WITHOUT PERMISSION BK Radio Page 5-131...
Page 209
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-132 Service Manual - KNG Mobiles...
Page 210
3333-31005-200 KNG-P500 RT Board THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF Sheet 3 of 5 Rev. D PRODUCTS WITHOUT PERMISSION BK Radio Page 5-133...
Page 211
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-134 Service Manual - KNG Mobiles...
Page 212
3333-31005-200 KNG-P500 RT Board THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF Sheet 4 of 5 Rev. D PRODUCTS WITHOUT PERMISSION BK Radio Page 5-135...
Page 213
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-136 Service Manual - KNG Mobiles...
Page 214
3333-31005-200 KNG-P500 RT Board THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF Sheet 5 of 5 Rev. D PRODUCTS WITHOUT PERMISSION BK Radio Page 5-137...
Page 215
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-138 Service Manual - KNG Mobiles...
Page 234
P-800 rx/tx Board 8888-30976-700 KNG-P800 RT Boa THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF Sheet 1 of 1 PRODUCTS WITHOUT PERMISSION BK Radio Page 5-157...
Page 235
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-158 Service Manual - KNG Mobiles...
Page 236
P-800 rx/tx Board 3333-30976-700 THIS DRAWING IS PROPERTY OF RELM AND SHALL KNG-P800 RT Boa NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF PRODUCTS WITHOUT PERMISSION Sheet 1 of 6 BK Radio Page 5-159...
Page 237
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-160 Service Manual - KNG Mobiles...
Page 238
P-800 rx/tx Board 3333-30976-700 THIS DRAWING IS PROPERTY OF RELM AND SHALL KNG-P800 RT Boa NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF PRODUCTS WITHOUT PERMISSION Sheet 2 of 6 BK Radio Page 5-161...
Page 239
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-162 Service Manual - KNG Mobiles...
Page 240
P-800 rx/tx Board 3333-30976-700 THIS DRAWING IS PROPERTY OF RELM AND SHALL KNG-P800 RT Boa NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF PRODUCTS WITHOUT PERMISSION Sheet 3 of 6 BK Radio Page 5-163...
Page 241
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-164 Service Manual - KNG Mobiles...
Page 242
P-800 rx/tx Board 3333-30976-700 KNG-P800 RT Boa THIS DRAWING IS PROPERTY OF RELM AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF Sheet 4 of 6 PRODUCTS WITHOUT PERMISSION BK Radio Page 5-165...
Page 243
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-166 Service Manual - KNG Mobiles...
Page 244
P-800 rx/tx Board 3333-30976-700 THIS DRAWING IS PROPERTY OF RELM AND SHALL KNG-P800 RT Boa NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF PRODUCTS WITHOUT PERMISSION Sheet 5 of 6 BK Radio Page 5-167...
Page 245
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-168 Service Manual - KNG Mobiles...
Page 246
P-800 rx/tx Board 3333-30976-700 THIS DRAWING IS PROPERTY OF RELM AND SHALL KNG-P800 RT Boa NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF PRODUCTS WITHOUT PERMISSION Sheet 6 of 6 BK Radio Page 5-169...
Page 247
Contents P400 rf Board illustrated Parts list BLANK PAGE Page 5-170 Service Manual - KNG Mobiles...
Need help?
Do you have a question about the KNG Series and is the answer not in the manual?
Questions and answers