Set up
modem
Before you can start using your new
modem, you'll need to set it up.
You will need to have an activated
Vodafone SIM card – this should have
been provided when the modem was
purchased.
•
Remove the SIM card holder from the
side of the modem. Slide the SIM card
in as shown, making sure it's fi rmly
in place.
•
Put the SIM card holder back into the
side of the modem.
You should have been supplied with
two data cables – one short and
single-ended one, and one long and
double-ended. You only need to use the
double-ended cable if a single one of
your USB ports does not supply enough
power (if it is a self-powered USB hub for
example).
•
Plug the single end of the data
cable into the modem as shown.
•
Plug the other end into your
computer's USB port – if this
does not power the modem,
then use the double-ended cable.
This should automatically start the
software – see next page.
your Huawei E220
3