Table of Contents
Advertisement
Modem Setup (PC)
Device Recognition (PC)
With USIM Card installed, insert modem USB plug into PC USB port. PC should
2
automatically recognize modem within approximately 45 seconds.
System message appears upon modem recognition. See "Software Installation
(PC)" to install SoftBank HW Utility.
•
Modem may fail if PC enters sleep mode, etc. with it connected.
Remove modem before leaving a PC unattended, etc. Modem may malfunction
if connected before PC starts/restarts. Remove modem before starting/restarting
PC.
2-2
Software Installation (PC)
Use this modem to access Network or adjust settings.
Installing SoftBank HW Utility
•
Do not remove modem during installation. May cause installation failure, system
malfunction or other system errors.
•
Login using administrator privilege.
For checking whether logged in using administrator privilege, see P.6-4.
Window 7
a Start PC and initiate Windows
b Insert modem into PC
c Utility installer and device driver are stored on modem.
Modem installs as USB mass-storage device at first use.
(Device recognition takes approximately 45 seconds.)
Utility installer starts, device driver and utility software install
automatically.
•
If an older version of SoftBank Utility is already installed a message appears.
Remove old version before installation (See "Uninstalling SoftBank HW Utility" on
P.2-8.).
Advertisement
Table of Contents
