Storing/Copying/Naming Presets - DigiTech RP360 Owner's Manual

Storing/Copying/Naming Presets

The STORE button is used to store edits made
to a preset's parameters� The STORE button's
LED will light whenever a preset's parameters
have been modified from their stored value� Any
parameter edits must be stored to a preset before
the processor is powered down or the preset is
changed in order for edits to be retained� Preset
edits can only be stored to a user preset
memory location since factory presets cannot be overwritten� The RP360 and RP360XP have 99 user
preset memory locations� Factory presets can be edited and then stored to a user preset location�
When storing a preset you will have the option to change the preset's name�
To store/copy/rename a preset:
1�
Press the
STORE
2�
If you do not want to change the name of the preset, go to step 3� To modify or change the
name, use the 3
screen character� Turning the
Turning the
EDIT 3
character; turning it counter-clockwise will delete characters to the left of the selected
character� The preset name can contain up to 16 characters�
3�
If you do not want to change the preset location go to step 4� To select a new preset location,
turn the
SELECT
name�
4�
Press the
STORE
procedure� The LCD display will briefly display "Storing���" then the preset will be stored�
NOTE: Pressing the
procedure�
button to initiate the store procedure�
knobs� Turning the
EDIT
(
EDIT 2 CURSOR
( ) knob clockwise will insert space to the left of the selected
DEL/INS
knob until the desired user preset memory location is displayed below the
button a second time, or press the
button at any time during the above store procedure will abort the
BACK
1 P
1
1 :
LETTER
( ) knob will edit the selected on-
EDIT 1 LETTER
) knob selects the character you want to edit�
button, to confirm the store
SELECT
RP360 / RP360 XP
lexi-Drive
Plexi-Drive
LOOPER READY
STORE TO:
Plexi-Dri
BACK TO CANCEL
<CURSOR> DEL/INS
17