Mitsubishi Electric GB-50A Instruction Book page 7

3-3 Setting Functions
Make initial settings with either the Initial Setting Web or Initial Setting Tool.
Item
M-NET address
setting
IP address setting
Function selection
Group registration
Registration of
interlocked
operation with the
Lossnay unit
Switch for start-up
mode
Other settings
1) How to set the IP address with dipswitches
IP addresses between 192.168.1.1 and15 can be set using the 4-pin dip switch on SW2.
Set this switch before turning the power on.
Note
● When setting IP addresses with the Initial Setting Web or the Initial Setting Tool, set all four
dipswitches on SW2 to OFF.
Table 3-3 List of initial-setting functions
This Unit Initial Setting Tool
√
(simple setting)
√
(Inside the cover)
SW 2
ON
OFF
1 2 3 4
Initial Setting
Web
√ √
√ √
√ √
√ √
√ √
√ √
1 2 3 4
Address that is set with Initial Setting Web or
OFF OFF OFF OFF Initial Setting Tool.
(Initial IP address setting is 192.168.1.1)
OFF OFF OFF ON Starts from 192.168.1.1
OFF OFF ON OFF Starts from 192.168.1.2
OFF OFF ON ON Starts from 192.168.1.3
OFF ON OFF OFF Starts from 192.168.1.4
OFF ON OFF ON Starts from 192.168.1.5
OFF ON ON OFF Starts from 192.168.1.6
OFF ON ON ON Starts from 192.168.1.7
ON OFF OFF OFF Starts from 192.168.1.8
ON OFF OFF ON Starts from 192.168.1.9
ON OFF ON OFF Starts from 192.168.1.10
ON OFF ON ON Starts from 192.168.1.11
ON ON OFF OFF Starts from 192.168.1.12
ON ON OFF ON Starts from 192.168.1.13
ON ON ON OFF Starts from 192.168.1.14
ON ON ON ON Starts from 192.168.1.15
6
Remarks
The default value is 0.
The settings of the simple
setting have the priority
over other settings.
Presence/absence of
K transmission converter
connection, local operation
prohibition setting, and external
input mode
Available functions vary
depending on the tools.
Contents (IP address)