4.3. Lens Focus Adjustment
D
* Models herein and their appearance are subject to change without any prior notice.
4.4. Setting the Image Attribute
You can set the image attribute of camera through the webpage.
The menu of image attribute can be seen under Setup > Video & Audio > Video‐in > Attribute
Setting. Brightness, contrast, hue, saturation and sharpness can be adjusted.
A
C
E
1) Open the dome cover from the device.
2) Uncover the latch(C) carefully to
remove the lens cover.
3) Rotate the lens focus ring(D) to adjust
the focus and fasten the screw(E)
using the included hex wrench.
4) Push the lens cover to the module
until the latch(C) clicks into position.
5) Attach the dome cover by aligning
protrusion on the body (B) with the
inverted triangle mark of the dome
cover (A). Turn the dome cover
clockwise to lock.
NM‐IP100
9