Figure 2-5: Adjusting The Legs To Level The Appliance - Miele W1903 User Manual

W1900 Series Clothes Washers
Note:
Movement of the machine without the Shipping Struts in place should be
kept to a minimum.
NEVER operate the appliance with the Shipping Struts installed.
The Shipping Struts should be stored in a safe place and must be
reinstalled if the machine is going to be moved.
Reinstallation can be performed by reversing the above procedure.
3. Refer to Figure 2-5. To level the appliance, perform the following:

Figure 2-5: Adjusting the Legs to Level the Appliance.

a. Tip the machine slightly and place a support, such as a block of
wood, underneath it.
b. Unscrew each of the four feet as much as necessary by turning
both the foot 1 as well as the locking ring 2 counterclockwise
using a screwdriver - as shown.
c. Remove the support, stand the machine on its feet and check to
see if it is level.
d. Repeat this procedure as often as necessary until the machine
stands level.
e. Turn each locking ring until it is tight against the bottom of the
machine frame.
21
Technical Information