Quick Setup
Clock Set
Before you use any of your monitor's timer functions, you must first set the clock.
SET CLOCK
TIME
START CLOCK
SELECT
OPERATE
When the setup is finished, "THANK YOU ! SETUP IS NOW COMPLETE" is displayed. Your
quick setup is now complete. You can now begin watching your monitor, or you can continue
on in this guide for more information on programming your remote control, or using the
JVC onscreen menu system to customize your monitor viewing experience.
Note:
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
24
è
†
è
†
-- : -- --
EXIT
MENU
To set the hour
To minute
To set the minute
To START CLOCK