Connecting To The Computer - JVC HD-ILA HD-52G587 User Manual

Connecting to the computer

This monitor can be used as a computer screen. Use a commercially available D-SUB cable
to connect the monitor's PC INPUT terminal to the computer's analog RGB output terminal. If
you want to listen to the sound from the computer, use a commercially available RCA cable to
connect the INPUT-3 audio input terminal to the computer's audio output terminal.
Notes:
• Refer to your computer manual for a detailed explanation of the connections concerning your
computer.
• Make sure that the connectors are facing the correct way when connecting.
• After connecting, tighten the two screws to fix the connectors in place.
Looking at the images from a computer
After starting the computer, press the INPUT button to choose INPUT-3. You can listen to the
sound when the sound from the computer is connected to the INPUT-3 AUDIO input terminal.
Notes:
• When the sound from the computer is connected to INPUT-3 by choosing external input
INPUT-3, the sound from the computer can be listened to, but the images from the computer
cannot be seen.
Quick Setup
Monitor Rear Panel
S-VIDEO
VIDEO R - AUDIO - L
INPUT-1
OVER
VIDEO R - AUDIO - L
INPUT-2
S-VIDEO
VIDEO R - AUDIO - L
INPUT-3
OVER
R - AUDIO - L
Y Pb Pr
INPUT-1
Y Pb Pr
INPUT-2
R L
INPUT-3
(D-SUB)
HDMI 1
AUDIO
OUTPUT
PC IN
21