4
3
5. Remove the carbon deposits on the muffler screen
NOTICE
When cleaning, use the wire brush lightly to avoid
damaging or scratching of the muffler screen and
711-075
spark arrester.
6. Check the muffler screen and the spark arrester.
1
7. Install the spark arrester.
2
TIP
711-076
Align the spark arrester lump to the hole in the muffler
pipe.
1 Spark arrester lump
2 Hole
8. Install the muffler screen and the muffler cap, and
711-077
9. Install the heat-protection cover and the cover, and
Cover bolt tightening torque:
AIR FILTER
2
1. Remove the bolts and the cover.
1 Bolts
1
2 Cover
788-012
2. Remove the clips holding the air filter cover.
3. Remove the air filter cover and the air filter ele-
3 Clips
4 Air filter cover
788-013
and the spark arrester using a wire brush.
Replace them if damaged.
then tighten the bolt.
then tighten the bolts.
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
ment.
– 32 –
Need help?
Do you have a question about the EF3000iS and is the answer not in the manual?
Questions and answers