Yamaha EF3000iS Owner's Manual page 21

1
2
EF3000iSEB
to STARTER RELAY
to DC-DC
CONVERTER
6
6
5
8
8
5. Install the battery onto the battery box.
6. Connect the positive lead (red) to the positive bat-
3
tery (+) terminal, then the negative lead (black) to
the negative (–) battery terminal.
4
1 Positive (+) lead (red)
2 Positive (+) battery terminal
762-045
3 Negative (–) lead (black)
4 Negative (–) battery terminal
to ENGINE
TIP
9 Clamp the red wire to the positive (+) terminal first,
then the black wire to the negative (–) terminal of
the battery. Do not reverse these positions.
762-045a
9 For EF3000iSEB, tighten the two positive battery
leads (one from the starter relay and one from the
DC-DC converter) to the same positive terminal
and the two negative battery leads (one from the
engine and one from the DC-DC converter) to the
same negative terminal.
7. Secure the battery with the battery band.
8. Install the battery box and tighten the bolts.
5 Battery box
6 Bolts
6
6
Battery box bolt tightening torque:
788-007a
9. Install the cover and tighten the bolts.
7
8
7 Cover
8
8 Bolts
788-006a
Cover bolt tightening torque:
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
– 15 –