Advertisement
4.
Drill two holes with 1/16" drill in marked locations.
5.
Secure back cover to the mounting surface with the 3x20mm screws.
6.
Press front housing onto back cover.
7.
Test operations, if chime does not work, see TROUBLESHOOTING.
Chime Unit Mounting Instructions
Note:
Avoid mounting on metal surfaces, as it may result in a reduced
range of transmission.
1.
Select chime mounting location.
2.
Use the supplied chime template to mark mounting holes.
3.
Drill 5/32" holes at marked locations.
4.
Insert supplied wall anchors into the holes.
5.
Insert the 4/20mm screws into the anchors, setting the screw heads
extending about 1/4" from mounting surface.
6.
Place the chime unit's keyhole slots over the screws and press down on
the chime unit to secure it.
Advertisement
