Advertisement
5. To change the house code, add or remove jumpers as needed. It is
recommended to change only one jumper at a time and then test the
system for proper operation. The jumpers on the chime and pushbutton
must match exactly.
Push Button Mounting Instructions
Note:
Avoid mounting on metal surfaces, as it may result in a reduced
range of transmission. Do not mount in an area where exposed to direct
rain.
a. Removing the back cover
b. Replacing the back cover
The image cannot be displayed. Your computer may not have enough memory to open the image, or the image may have been corrupted. Restart your computer, and then open the file again. If the red x still appears, you may have to delete the image and then insert it again.
1. Push buttons are typically mounted at the same height as the door knob or
handle (between 36" and 44" above the floor).
2. Before mounting, choose a mounting location that is not farther than 150
feet from the chime unit location.
Advertisement
