Table of Contents
Advertisement
INSTRUCTION MANUAL
2-GALLON (7.6 L)
AIR COMPRESSOR
058-7000-2
058-7000-2-Air-Compressor-2G-EN-03.indd 1-2
If any parts are
missing or damaged,
or if you have any
questions, please call
our toll-free helpline
at 1-877-888 -3872.
Read and understand this instruction manual
thoroughly before using the product. It contains
important information for your safety as well as
operating and maintenance advice.
Keep this instruction manual for future use. Should
this product be passed on to a third party, this
instruction manual must be included.
An English version of this manual is available
online at:
www.canadiantire.ca/manuals
中文版說明書請參照:
www.canadiantire.ca/manuals
218549
Version: 01
2-GALLON (7.6 L) AIR COMPRESSOR - 058-7000-2
6/11/12 8:14 AM
Advertisement
Table of Contents
Related Manuals for MasterCraft 2-GALLON (7.6 L)AIR COMPRESSOR
Summary of Contents for MasterCraft 2-GALLON (7.6 L)AIR COMPRESSOR
-
Page 1: Instruction Manual
If any parts are missing or damaged, or if you have any questions, please call our toll-free helpline at 1-877-888 -3872. Quick Start Guide Read and understand this instruction manual thoroughly before using the product. It contains important information for your safety as well as operating and maintenance advice. - Page 2 STEP 1 STEP 4 QUICK START GUIDE 0 (0ff) TECHNICAL SPECIFICATIONS Set the power switch to the 0 (off) Close the tank drain valve, SAFETY GUIDELINES 4 – 6 position. located on the bottom of the air tank. CLOSE KEY PARTS DIAGRAM KEY PARTS LIST STEP 2 INTENDED USE...
- Page 3 This manual contains information that relates to PROTECTING PRODUCT NUMBER 058-7000-2 PERSONAL SAFETY and PREVENTING EQUIPMENT PROBLEMS. It PEAK HORSEPOWER is very important to read this manual carefully and understand it thoroughly before using the product. The symbols listed TANK SIZE 2 U.S.
- Page 4 5. Do not carry the compressor while it is running. RISK OF PERSONAL INJURY. Never spray compressed air or material at self or others. 6. Do not operate the compressor if it is not in a stable position. 7. Do not operate the compressor on a rooftop or an elevated position that could allow the unit to fall RISK OF BURSTING.
- Page 5 A. ELECTRIC MOTOR: The motor is used to power the pump. B. FUSE: The fuse is used to protect the motor. C. POWER SWITCH: This switch turns the compressor on and off. It is operated manually and when it is in the ON position, it allows the motor to start if the pressure in the air tank is below the factory set cut-in pressure, and allows the motor to stop if the pressure in the air tank reaches the factory OUTLET PRESSURE ELECTRIC MOTOR (A)
- Page 6 Before you start Tool Compatibility Chart This Mastercraft® Air Compressor is ideal for a wide-range of applications from fastening to greasing Operates Tool Operates Tool Air Tool Not Recommended Continuously Intermittently and engine cleaning. The 2-gallon (7.6 L) design provides optimum pressure. It is light weight and oil- free.
- Page 7 Assembly TOOLS REQUIRED FOR ASSEMBLY (NOT INCLUDED): ACCESSORY Unpack the air compressor. Inspect the unit for damage. If the unit has been damaged, contact the retailer immediately. 11/16” open-end wrench or IMPORTANT! If any parts are missing or damaged, or if you have any questions, please call our toll-free helpline at 1-877-888-3872.
- Page 8 Connect air hose to compressor Attach other accessories • Apply plumber's tape on the hose threads to prevent air leakage. Tire chuck • Screw the hose connector into the air outlet (K) on the air compressor. Tapered nozzle End of hose or low gun Air outlet (K) Blow gun...
- Page 9 Before each start-up How to shut down Set the power switch (C) to the 0 (off) position. Set the power switch (C) to the 0 (off) position. Turn the air pressure regulator knob (G) counter-clockwise until it stops. Unplug the power cord (E). Attach hose and accessories.
-
Page 10: To Check Safety Valve
To check safety valve SERVICE ITEM DESCRIPTION / REASON INTERVAL Through normal operation of your air compressor, condensation water will WARNING! Risk of bursting. If the safety valve does not work properly, over- accumulate in the tank. To prevent corrosion of the tank from the inside, pressurization may occur, causing air tank rupture or an explosion. - Page 11 PROBLEM POSSIBLE CAUSES SOLUTIONS PROBLEM POSSIBLE CAUSES SOLUTIONS The power cord is not plugged in. Plug the power cord into a grounded outlet. The power switch is in the 0 (off) regulator does The regulator or its internal parts Set the power switch to the I (on) position. Replace the regulator.
- Page 12 screw M6*12 screw M4*10 motor cover damping pad sheath rubber pressure controller power switch zip tie screw M4*40 tube cylinder cover power cord silica gel ring Ø31.5*1.8 heat shrink tube cylinder washer tank silica gel ring Ø31*2 rubber feet cylinder flat washer Ø6 paper pad screw M6*15...
-
Page 13: Additional Limitations
Additional Limitations This Mastercraft® product is guaranteed for a period of three This warranty applies only to the original purchaser and may not be transferred. Neither the retailer years from the date of original retail purchase against nor the manufacturer shall be liable for any other expense, loss or damage, including, without limitation, YEAR defects in materials and workmanship.
Need help?
Do you have a question about the 2-GALLON (7.6 L)AIR COMPRESSOR and is the answer not in the manual?
Questions and answers