Related Manuals for MasterCraft 58-7914-8
Summary of Contents for MasterCraft 58-7914-8
- Page 1 8-gallon Air Compressor 58-7914-8 Owner’s Manual If any parts are missing or damaged, or if you have any questions concerning this product, please contact the toll-free helpline, at 1-800-689-9928 6106-0170-03...
-
Page 2: Table Of Contents
SHUT-DOWN ---------------------------------------------------------------------------------------------------------- 7 MAINTENANCE------------------------------------------------------------------------------------------------------- 8 TROUBLESHOOTING ---------------------------------------------------------------------------------------------- 9 EXPLODED VIEW & PARTS LIST ----------------------------------------------------------------------------- 10 WARRANTY----------------------------------------------------------------------------------------------------------11 Specifications Model #: 58-7914-8 Peak horsepower: Tank size: gal. (30.3litres) Air delivery (SCFM) @ 40 PSI: Air delivery (SCFM) @ 90 PSI: Cut-in pressure (PSI):... -
Page 3: Safety Guidelines
SAFETY GUIDELINES This manual contains information that relates to PROTECTING PERSONAL SAFETY and PREVENTING EQUIPMENT PROBLEMS. It is very important to read this manual carefully and understand it thoroughly before using the compressor. The symbols listed below are used to indicate this information. DANGER POTENTIAL HAZARD THAT WILL RESULT IN SERIOUS INJURY OR LOSS OF LIFE WARNING... -
Page 4: Basic Compressor Features
BASIC COMPRESSOR FEATURES A--------ELECTRIC MOTOR G--------REGULATED PRESSURE GAUGE B--------AIR COMPRESSOR PUMP H--------AIR LINE OUTLET C--------PRESSURE SWITCH I---------AIR TANK DRAIN VALVE D--------PRESSURE RELIEF VALVE J---------AIR TANK E--------AIR PRESSURE REGULATOR K--------POWER CORD F--------TANK PRESSURE GAUGE... -
Page 5: Electric Motor
BASIC COMPRESSOR FEATURES A. ELECTRIC MOTOR: The motor is used to power the pump. It is equipped with a thermal overload protector and an automatic reset. If the motor overheats for any reason, the thermal overload protector will shut it down in order to prevent the motor from being damaged. The motor will automatically restart when it has cooled completely. -
Page 6: Assembly Instructions
ASSEMBLY INSTRUCTIONS 1. Unpack the air compressor and verify that all parts are present and undamaged. If any parts are missing or damaged, call the toll-free helpline, at 1-800-689-9928. 2. Check the serial tag label to ensure that the compressor has the required pressure rating for its intended use. -
Page 7: Operating Instructions
OPERATING INSTRUCTIONS BREAKING IN THE PUMP NOTE: The pump is shipped oil. Before using the without compressor, pour the break-in oil (included) into the pump through the oil nozzle. Change the break-in oil after 8 hours of operation. In order to reduce maintenance and repair problems, use 58-8143-6 Campbell Hausfeld Air Compressor Oil. -
Page 8: Maintenance
MAINTENANCE WARNING: In order to avoid personal injury, shut off and unplug the air compressor and relieves all air pressure from the system before performing any service. Regular maintenance will ensure trouble-free operation. The items listed in this chart should be inspected on a regular basis. -
Page 9: Troubleshooting
TROUBLESHOOTING NOTE: Several problems may have similar causes and solutions. PROBLEM POSSIBLE CAUSE SOLUTION The power cord is not plugged in Plug the power cord into a grounded outlet. The pressure switch is in the “OFF” Turn the switch to the “ON” position position The extension cord is the wrong wire Check chart on page 2 for the proper wire gauge and... -
Page 10: Exploded View & Parts List
EXPLODED VIEW PARTS LIST Part No. Description Quantity Part No. Description Quantity SHOULDER BOLT BLEEDING TUBE WHEEL PRESSURE SWITCH WASHER PRESSURE GAUGE SPRING WASHER ADAPT FITTING REGULATOR TANK QUICK CONNECTOR TRANSFER TUBE PLASTIC ANCHOR&NUT RIGHT ELBOW POWER CORD INTAKE FILTER BOLT PUMP ASSEMBLY RUBBER FOOT... -
Page 11: Warranty
MASTERCRAFT® LIMITED WARRANTY This MASTERCRAFT® product is guaranteed for a period of 3 years from the date of original retail purchase against defects in materials and workmanship. Subject to the conditions and limitations described below, this product, if returned to us with proof of purchase within the stated warranty period and if covered under this warranty, will be repaired or replaced (with the same model, or one of equal value or specification), at our option.
Need help?
Do you have a question about the 58-7914-8 and is the answer not in the manual?
Questions and answers
Where can I obtain a replacement part: Air Tank Drain Valve. Compressor model 58-7914-8
You can find a replacement Air Tank Drain Valve for the MasterCraft compressor model 58-7914-8 by referring to part number 28 in the parts list. Contact the toll-free helpline at 1-800-689-9928 for assistance with ordering replacement parts.
This answer is automatically generated