Changing The Filter - Jura ENA 9 One Touch Instructions For Use Manual

5 Maintenance
T Press the releasing devices and pull the dual
spout down and off.
T Push the milk system down and remove it.
T Dismantle the milk system into its individual
parts.
T Rinse all parts under running water. If there
are severely dried on milk residues, firstly
immerse the individual parts in JURA
Cappuccino Cleaner and then clean them
thoroughly.
T Fit the air intake pipe.
22
T Reassemble the milk system, noting the
numbering on the parts.
T Insert the assembled individual parts into
the dual spout and press them together.
T Fit the dual spout on the machine. It will
click into place audibly.

Changing the filter

E After 2000 oz (60 liters) of water have flowed
through, the filter will cease to work. Your
ENA will automatically prompt you to
change the filter.
E After two months, the filter will cease to
work. You can check the elapsed time by
referring to the date plate on the filter holder
in the water tank.
E If the CLEARYL Blue filter cartridge is not
activated in programming mode, you will
not be prompted to change the filter.
Precondition:
FILTER
T Open the cover behind the Rotary Switch.
c T Press the Maintenance button.
INSERT FILTER
T Remove and empty the water tank.
T Open the filter holder and remove the old fil-
ter cartridge.
/ is displayed.
READY