Language J; Suds Cooling; Time (Of Day) - Miele PW 6065 Plus Sluice Operating And Installation Instructions

Language J

The display can be set to appear in
one of several different languages.
To select the language you want, go to
the Languages J sub-menu.
^ If the language shown is not the one
you want turn the multi-function
selector to highlight the one that you
do want and confirm your selection.
The flag after the word Language acts
as a guide to prevent a language which
will not be understood from being set.
The different language setting will only
apply to the programme currently in
use. After the programme has finished
the display will revert to the default
language which was set in the Settings /
Supervisor level menu.

Suds cooling

When this is activated, additional
water flows into the drum at the end
of the main wash to cool the suds
down. Hot suds can damage plastic
drainage pipes.
Suds cooling takes place when
temperatures of more than 70°C are
selected.
Suds cooling should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
Settings menu J
– where the drainage pipes do not
comply with DIN 1986.
The machine is delivered with Suds
cooling activated.

Time (of day)

First select whether you want the
clock displayed as a 24 hour or 12
hour clock, or to not display it at all.
Then set the current time of day.
If you select to not display the clock,
the Timer can only be used to delay the
start by up to 24 hours, i.e. you cannot
set the time of day that you want the
programme to finish at.
To select a 24 hour or 12 hour clock
^ Select the clock option you want and
confirm your selection.
The display will then change to the
screen for setting the time of day.
Set the time
Use the multi-function selector to select
the hour and confirm your selection.
Now set the minutes. Pressing the
multi-function selector again saves the
time of day in memory.
65