Before Using For The First Time - Miele PW 6065 Plus Sluice Operating And Installation Instructions

Before using for the first time

Before using the machine for the first
time ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the drain filter is securely
tightened to prevent the risk of water
leaks during use.
For safety reasons, spinning is not
possible until the machine has been set
up for using for the first time. To activate
the spinning function you must run a
wash programme without laundry and
without detergent.
^ Open the stopcocks.
Welcome screen
When the machine is switched on for
the first time, a welcome screen will
appear.
Miele Professional Welcome
The welcome screen will not appear
again after the first programme has
been completed.
After four seconds the display will
change to the screen for setting the
language.
Language J
^ If the language shown is not the one
you want turn the multi-function
selector to highlight the one that you
do want and confirm your selection.
12
Removing the transport struts
A message will appear in the display to
remind you to remove the transport
struts.
^ If they have already been removed
press short cut button G, or
remove them and then press the
multi-function selector to confirm that
this has been done.
Set the time
^ Turn the multi-function selector to
select the hour and press it to
confirm your choice. Then do the
same to set the minutes. Pressing the
multi-function selector again saves
the time of day in memory.
Running your first programme
^ Select the Cottons Universal 60°C
programme and confirm your
selection.
The main menu for Cottons Universal
will then appear.
^ Make sure the machine door is
closed and then press the flashing
Start button. When the programme
has finished, your machine is ready
for using for the first time.