Basic Playback For D.s.c - JVC GR-DVM90 Instructions Manual

PLAYBACK
[For Normal Playback]
To display the next image
Display
I M A G E
1 0 / 24
I M A G E
1 1 / 24
I M A G E
1 2 / 24
I M A G E
1 3 / 24
Total number of images
Displays the total number of stored images.
Image number
To display the
Displays the index number of the image file (
previous
image

Basic Playback For D.S.C.

Play Button (4/6)
Fast-Forward
Button (3)
Rewind Button (2)
Stop Button (5)
POWER Switch
Lock Button
[For Auto Playback]
100 – 0010
100 – 0011
100 – 0012
100 – 0013
Directory and File names
Displays the directory and file names (
Normal Playback
Images shot with the camcorder are automatically
numbered, then stored in numerical order in the
MultiMediaCard. You can view the stored images, one at a
time, much like flipping through a photo album.
1
Load a MultiMediaCard (
2
Set the POWER Switch to "
down the Lock Button located on the switch. Open
the LCD monitor fully or pull out the viewfinder fully.
•A stored image is displayed.
3
Press 3 to display the next image.
Press 2 to display the previous image.
Auto Playback
You can run through all the images stored in memory
automatically.
1
Perform steps 1 and 2 above.
2
Press 4/6.
•If you press 2 during Auto Playback, images are
displayed in descending order.
•If you press 3 during Auto Playback, images are
displayed in ascending order.
3
To end Auto Playback, press 5.
NOTES:
Even if you shoot a new image after playing back a low-
numbered one, this will not overwrite an existing image,
because new images are automatically stored after the
last-recorded one.
Image number, directory and file names appear if "ON
SCREEN" is set to either "LCD" or "LCD/TV" in the
Menu Screen ( pg. 31).
pg. 48, 49).
EN
pg. 14).
" while pressing
pg. 48, 49).
47