Recording Mode Setting - JVC GR-DVL100 Instructions Manual

MENU/BRIGHT Wheel
Power Switch
Power lamp
Display
C A M E R A MEN U
1
R E T U R N
R E C M O D E S P
S O U N D M O D E L P
Z O O M
G A I N U P
T A L L Y
I D N U M B E R
D E M O . M O D E
S I D E L E D

Recording Mode Setting

Set the tape recording mode depending on your preference.
1
2
3
4
Lock Button
NOTES:
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
It is recommended that tapes recorded in the LP mode
on this camcorder be played back on this camcorder.
Menu Screen
During playback of a tape recorded on another
camcorder, blocks of noise may appear or there may be
Sub Menu
momentary pauses in the sound.
GR-DVL300EA
only
Set the Power Switch to "
the Lock Button located on the switch. The power
lamp lights and the camcorder is turned on.
Press MENU/BRIGHT. The Menu Screen appears.
Rotate MENU/BRIGHT to select "
"CAMERA MENU" appears.
Rotate MENU/BRIGHT to select "REC MODE" and
press it. The Sub Menu appears. Select "SP" or "LP"
by rotating MENU/BRIGHT and press it. Rotate
MENU/BRIGHT to select "1RETURN", and press it
twice. The Menu Screen closes.
•Audio Dubbing ( pg. 49) is impossible on a tape
recorded in the LP mode.
•"LP" (Long Play) is more economical, providing
1.5 times the recording time.
11
EN
" while pressing down
" and press it.