Adjusting Sensor Sensitivity Setting - Hitachi EP-A5000 Instruction Manual

Adjusting Sensor Sensitivity Setting

Sensor sensitivity can be adjusted in 3-step fashion.
In each operation mode,
press
(Use the tip of a ball-point pen or
the like.)
The airflow indicator will blink
for 5 seconds.
While the airflow indicator is blinking,
press
The factory setting is "Medium".
Sensor
Setting
button.
Sensor
Setting
button.
Present setting is shown by the airflow
indicator that blinks for 5 seconds.
Blink
Every time you press the button, the setting switches.
(Low) (Medium) (High)
E-15