Using The Remote Control Unit; Installing The Batteries; Push] - JVC GR-DV2000 Instructions Manual
Jvc digital video camera instructions
Hide thumbs
Also See for GR-DV2000:
- Instructions manual (98 pages) ,
- Instructions manual (98 pages) ,
- Instructions manual (98 pages)
Table of Contents
Advertisement
USING THE REMOTE CONTROL UNIT
1
2
+
–
Transmitted beam
effective area
5m
30°
30°
3
Tab
–
+
Remote sensor
The Full-Function Remote Control Unit can operate this
camcorder from a distance as well as the basic operations
(Playback, Stop, Pause, Fast-Forward and Rewind) of your
VCR. It also makes additional playback functions possible.
Installing The Batteries
The remote control uses two "AAA (R03)" size batteries.
See "General Battery Precautions" (
1
Remove the battery compartment cover while
pushing up the tab as illustrated.
2
Insert two "AAA (R03)" size batteries in the correct
direction.
3
Re-attach the battery compartment cover.
When using the remote control, be sure to point
it at the remote sensor. The illustration shows the
approximate transmitted beam effective area for
indoor use.
The transmitted beam may not be effective or
may cause incorrect operation outdoors or when
the remote sensor is directly exposed to sunlight
or powerful lighting.
61
EN
pg. 89).
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the GR-DV2000 and is the answer not in the manual?
Questions and answers
Hi! where can i buy an Ac power adapter charger for JVC GR DV2000
Remove and reattach battery unit in safeguard mode
To remove and reattach the battery unit on a JVC GR-DV2000 in safeguard mode:
1. Remove the power supply, including the battery.
2. Wait a few minutes for the safeguard mode indication to clear.
3. If the indication clears, reattach the battery and resume use.
4. If the indication remains, consult a JVC dealer.
To detach the battery:
- Slide the battery pack down slightly while sliding down the BATT. RELEASE switch.
To reattach the battery:
- With the arrow on the battery pack pointing upward, push it slightly against the battery pack mount.
- Slide the battery pack up until it locks in place.
Make sure the camcorder is turned off before detaching the power source to avoid malfunctions.
This answer is automatically generated