Touch Power To Turn On Washer; Select Type Of Load To Wash - Whirlpool Cabrio Use & Care Manual

Top-loading high efficiency low-water washer
Hide thumbs Also See for Cabrio:
Table of Contents

Advertisement

Available languages

Available languages

7.

Touch POWER to turn on washer

Make sure the dispenser drawer is closed completely, then
touch POWER to turn on the washer.
8.
Select the type of load to wash
First touch a cycle from the "What to
Wash" and then select the "How to Wash"
to get the best combination cycle available
for the type of items you are going to wash.
See "Cycle Guide" for cycle details. Red,
green, and blue LED lights come on below
the time/status display when the "How to
Wash" ColorLast cycle is selected. Not all
cycles are available on all models.
Estimated Time Remaining will light up with a cycle time.
You may notice time adjusting during the cycle. This is
normal.
If you do not want to begin a cycle immediately, you may
choose DELAY START option.
To choose a delay time:
1. Touch DELAY START button to select desired delay time.
Time will increase in hour increments up to 12 hours.
2. Touch and hold START/PAUSE button for 3 seconds to
start delay start time.
IMPORTANT: When delaying a cycle, use liquid HE
detergent only in the dispenser. Powdered detergents
may absorb moisture from a previous cycle and clump
before the wash cycle begins.
To cancel delay start:
1. Touch POWER to cancel Delay Start.
To pause delay start:
1. Touch START/PAUSE button to pause delay start.
2. Touch and hold START/PAUSE button again to start
Delay Start time.
10
9.
Select cycle modifiers
Once you select a cycle, the default modifiers or the previous
set modifiers for that cycle will be lit. Touch the cycle
settings buttons to change the Soil Level, Spin Speed, and
Temperature, if desired. Not all settings are available with all
cycles.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your items. If not sure on which
temperature to use, refer to the chart below or select
a cooler temperature.
Temperature suggestions
Light soils
Colors that
bleed or fade
NOTE: Even for cold wash settings, some warm water
may be added to the washer to maintain a minimum
temperature.
Moderate soils
Heavy Soils
Bright colors
Whites
Pastels

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents