Selecting A File For Playback; Turning Audio1 And 2 On And Off - Panasonic AG-CPD15P Operating Instructions Manual

Playback
(continued)

Selecting a file for playback

1. Press the [MENU] button.
The Menu appears.
2. Use the [ , ] buttons to select
[Archive] and press [
confirm the entry.
The playback file list screen appears.
Notes:
• [Archive] is not available when
there are no playback files.
• Files appear in the order of the
filenames (see "Rule of Filename"
on page 76) that are assigned at
recording.
"WT" (world time) files are displayed
in recording start order (but the time is
converted and indicated in local time)
"LT" (local time) files are displayed
in recording start order.
• When a file is recorded across two
P2 cards and is split into two files,
the start time of the latter file is
suffixed by "∗". Also, if two or more
files have the same start time,
the start time of the second and
succeeding files are suffixed by "∗".
3. Use the [ , ] buttons to select
a file to play back.
(Use the following functions to go
between pages.)
• Press the [ , ] buttons once to
turn pages one at a time.
• Keep pressing the [ , ] button to
go quickly between pages. This
function turns pages up to page 3
in one-page increments and pages
from page 4 in 10-page increments.
4. Use the [ ] button to start
playback.
Playback starts from the beginning
of the file.
When playback reaches end of the
file, playback is paused.
68

Turning Audio1 and 2 ON and OFF

1. Press the [MENU] button.
The Menu appears.
2. Use the [ , ] buttons to select
] to [Audio].
3. Use the [ , ] buttons to select
[Audio1] or [Audio2].
4. Use the [ , ] buttons to select
"ON" or "OFF".
Note:
An administrator can set the audio
output (Init Audio Out (Play))
selected at power-on.