Digistat - radio frequency controlled programmable room thermostat with domestic hot water programmer for greenstar cdi, greenstar i junior and greenstar si models
also greenstar i system and greenstar cdi system (only when used in conjunction with optio (28 pages)
Programmable 7 day room thermostat system for greenstar 25 he and greenstar 30 he models, radio frequency controlled programmable room thermostat (20 pages)
Installation and Operating Manual SMART ROOM THERMOSTAT Worcester Wave 6720810446-00.1Wo UK/IE Important: Keep these instructions, with the serial number, in a safe place.
The Worcester Wave is a smart, internet-connected programmable room thermostat which allows you to control both your central heating and hot water. The Wave can be controlled and programmed using a compatible Apple iOS or Android device across an existing Wi-Fi network.
More information regarding legal and privacy information can be viewed by visiting: www.worcester-bosch.co.uk/ homeowner/our-company/legal-and-privacy-information If the Worcester Wave is disconnected, the data for that day is not stored. Data connection • The Worcester Wave is only supported in the UK and Ireland.
Page 5
The time display is only visible if the time program is activated. The time display is broken down into one hour blocks and the pointer indicates the time. The actions of the time program can Worcester Wave– 6 720 810 446 (2014/09)
Initial inspection ▶ Before installation, check that your Worcester boiler and The Wave connects to your boiler’s EMS BUS connections only. the Worcester Wave are a compatible combination. Under no circumstances must the thermostat be connected The Worcester Wave website has a list of compatible boilers.
3.6.1 Software updates to the Wave The software is updated automatically, over your internet connection. Straight out of the box the Wave may not have the latest software installed, as a result, the full app. functionality may not yet be supported. The installed software version can be checked on the cleaning screen (...
Input Wi-Fi network password mode. Now the temperature can only be set manually on the screen. Connection to the app. or Worcester Wave web-site is not possible. Press the 1 key [4] to search again. Section 6.3.3, page 13 for possible solutions to connection problems.
▶ Download the Worcester Wave app. to your smart device from either: ▶ Install the Worcester Wave app. onto your smart device ▶ Make a connection to the Worcester Wave from your smart device ▶ Register the app. with the Worcester Wave website.
▶ Press and hold an up or down key to change the displayed 4.2.1 Combi boilers temperature quickly. The boiler preheat function must be enabled to allow the Wave Manual mode/time programme 4.1.2 to take control of your hot water.
These videos can also be accessed via the app 'Info' pages. To log the Worcester Wave onto a new Wi-Fi network or if the existing network has a new password: Online ▶ Reset the thermostat ( Section 6.3.2).
Fig. 7, page 7). If this does not solve the problem, with the Wave mounted on the wall, the reset key ( Fig. 19) can be pressed for a few seconds to remove the fault. If the fault occurs again, then contact the your installer or Worcester, Bosch Group Technical Support team.
Password with $ signs The Wave uses the standard Wi-Fi protocol, so it is not possible to use a $-sign in the Wi-Fi router password. Remove the $ sign from the router password. Symbol disappears when the temperature is changed via the display or when the next switching point is reached in the time programme mode.
A room temperature sensor monitors room temperature and adjusts the compensation curve parallel displacement to improve room comfort. Control is achieved by modulating the output of the heater. Worcester Wave– 6 720 810 446 (2014/09)
Need help?
Do you have a question about the Wave and is the answer not in the manual?
Questions and answers