Sharp PN-70TA3 Operation Manual page 48

Controlling the Monitor with a PC (LAN)
■ INFORMATION
Information about this monitor appears.
■ CONTROL
You can control the operations corresponding to the buttons
POWER INPUT SIZE
( ) on the remote control unit. (See page 25.)
TIPS
• In standby mode and whiteboard standby mode, the only
operation that can be performed is Power ON.
• When MONITOR POWER is set to OFF, the monitor enters
standby mode.
• Save any data you need in advance. The power will turn off
even if there is unsaved data. (The data will be lost.)
48
E
■ ADJUSTMENT
You can adjust these settings which are also available on the
monitor's menu.
• SCREEN (See page 33.)
• PICTURE (See pages 34 to 35.)
• AUDIO (See page 36.)
• SETUP (See pages 36 to 37.)
• MONITOR (See page 38.)
• SCHEDULE (See page 42.)
• PIP/PbyP (See page 39.)
• OTHERS (See page 40.)
• FUNCTION (See page 44.)
TIPS
• After changing DISPLAY COLOR PATTERN to OFF in
PICTURE menu, click [Refresh] to correctly retrieve the
status of the monitor.